Want this question answered?
anonymously
To replace the brake light bulbs on a VW Polo, pull away the carpeting in the trunk, unscrew the bolt holding the lights on, and disconnect the wiring. Replace the bulbs, put the wiring and bolts back, then replace the carpeting.
check light bulbs and fuses. light bulbs have 2 elements in them, one for stop and one for running. if thses are ok, replace brake light switch on brake pedal
remove trim, remove clock, remove clock light harness, and remove and replace clock light bulbs
Remove the tail light housing and replace the bulbs.
the screws come off and you replace it
Well If you unscrew the taillight from the car take it off you can change you tail light bulbs
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
There is a campaign on the brake bulbs for 2000-2003......If it hasn't been done you should get it done. The bulbs and sockets will be replaced.
The light assy has to be removed to take the bulbs out.
The lamp in the top brake light of a Toyota Highlander can be replaced by the locating the light housing from the trunk. Find the light cover and remove it to access the lights. Replace the bulbs.