0
The replacement of the valve cover gasket is relatively similar on 4 and 6 cylinders engines.
Remove the nuts on the valve cover, tap the side of the cover to break it free. It is a good practice when you replace the valve cover gasket to also replce the grommets for the valve cover nuts as well.
Clean each surface of the head and valve cover, usually wiping with a clean cloth will do. Sometimes you might have some silicone to remove, either way make sure you have clean & dry surfaces before placing the new gasket on the head.
Tighten the valve cover nuts snug, then go back and give them a final torque (my '95 accord torque spec is 7.2 ft. lbs).
Hope this helps,
Steve
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you replace the valve cover gasket on a 1990 Honda Accord?
How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.
How to replace a valve cover gasket on a 1988 Honda Accord LX?
just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.
How do you replace the valve cover gasket on a 2004 Jeep Liberty?
The valve cover gasket, on a 2004 Jeep liberty, can be found by removing the valve cover. Peel the gasket off of the head and replace with a new gasket.
How do you replace the valve cover gasket on your 2002 Mitsubishi lancer?
how do you replace the valve cover gasket on a 2002 mitubishi lancer
How do you replace the valve cover gasket on a S40 Volvo?
The valve cover ask it, on a S 40 Volvo, can be replaced by first removing the valve cover. Remove the old gasket and replace with a new gasket.
You have oil on your spark plug wires where is the oil coming from 93 Honda accord ex?
usually the valve cover gasket and the oil seals on the top of the cover,replace gasket and the also the distributor seal
How do I change the valve cover gasket on a 2001 Toyota Rav4?
how to replace valve cover gasket toyota rav4 2001
How to replace 2004 Hyundai elantra valve COVER gasket?
how do you change valve cover gasket 2004 hyundai elantra
How do you replace the valve cover gaskets on a 2003 Jeep Liberty?
To replace the valve cover gaskets on a 2003 Jeep Liberty, the valve cover is removed. The old gasket is then removed from both the valve cover and the manifold (old gasket will come off in pieces on both sides). Then spread the sealant on the manifold, place the new gasket on, then put sealant on top of the gasket and replace the valve cover and bolt down.
How do you you replace a valve cover gasket on a 1995 Dodge Intrepid?
Begin by removing the valve cover from your 1995 Dodge. Remove the valve cover gasket and clean the surface. Put the new gasket on and return the valve cover to its original position.
How do you Replace valve cover gasket 2001 corolla?
see this site. www.ehow.com/how_4507846_replace-valve-cover-gasket-toyota.html - 51k -
How much should it cost to replace a blown valve gasket?
you mean a valve cover gasket i think
