everyone should have a shop manual for their vehicle, and the library should have a professional shop manual(wiring diagrams and more detailed info) available in the reference section for FREE....make copies of the right sections, and fix it like a PRO!! good luck Dave :)
You normally replace it with a new belt and this requires some physical labor, tools, and a lot of learning how to get to it. Go to your local library for a motor manual before you tackle this job.
Look at the TCC solenoid in the trans is going to be bad.
All automatic transmissions fill through the dipstick tube.
the oil pump sits on the nose of the crankshaft, behind the timing belt sprocket.
NO, it can bend valves.
10MM
how do you put a Plymouth neon back in time 2.0L single overhead cam
i need a timing belt alingment diagram of 1996 plymouth neon 2.0
behind the timing belt.
External, but it is hidden by the timing belt cover. It is driven by the timing belt.
It is under the plastic housings on the passenger side of the engine.
Inside the front of the engine, driven by the timing belt.
It is inside the timing belt cover, on the front of the engine.
No, if the timing belt breaks, the valves and the pistons could clash.
Replacing the water pump on the 2000 Neon is a parallel to the explaination of replacing the timing belt which I have posted an answer for. If you have over 100,000 miles on the car, look at replacing the timing belt as well.
The water pump is timing belt driven. You should buy or borrow a service manual, as this is a very intensive repair.
It's under the timing belt cover and driven by the timing belt.That's about all I know.I'm here looking for DETAILED instructions on how to replace it.Answerits in the boton of timing belt you have to take the timing belt of and then replasit
Timing belt.