Want this question answered?
the brake light switch is located on the arm of the brake pedal, above the pad. you will see a plunger-type switch that extends and retracts with the compression of the brake pedal. to replace it, unbolt it from the bracket attached to the brake pedal, disconnect the electrical connector, replace new part (compare the adjustment of the new switch with the old & adjust if necessary), connect electrical plug, mount new switch to bracket & test.
how to replace the brake light switch at the pedal of a 2001 ford zx2
The B.O.O. switch or Brake On/Off switch is located at the top of the brake pedal assemble.
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
The brake light switch, on a Dodge neon, can be found under the dashboard just below the steering column. The brake light switch just unplugs. Unplug the switch and replace with a new one.
How do you replace a break light switch on 1995 Chevy Tahoe
brake light switch is mounted by the brake pedel remove lower panel above brake pedel and then you will see the switch should be able to turn the switch to replace
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
look on the brake pedal you will see a lil switch there that's the brake light switch
Probably the brake light switch is bad. The brake light switch is what sends the unlock signal when you step on the brake to move the gear selector.
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it.