Want this question answered?
Oldsmobile vehicles do not have inertia/reset switches.
Push both buttons at the same time, it will reset to zero.
Holding the button down for several seconds should reset the display info to zero
There is none. Gm vehicles are not equipped with an inertia switch.
Disconnect the neg battery cable for about 30 seconds; this will reset the computer. If there is a existing problem the code will reset however. Get yourself a HAYNES manual to identify the code and problem.
To reset the computer on a 1998 Bravada you need to disconnect the negative cable from the battery. Leave off for 10 minutes and reattach.
It should reset itself when the coolant is back to the appropriate level as long as the sensor is working properly. If you look in the overflow reservoir and can see coolant, the sensor or wiring might be the problem.
A 1991 Oldsmobile does not have a reset button.
You can disconnect the negative battery cable, wait a couple minutes then reconnect the cable. This will clear the codes and reset the check engine light but, if the reason the light came on isn't fixed the light will come back on soon.
no reset switch in this system
I just had an oil change and the guy turned the key on (did not start car). Pumped the gas pedal three times simultaneous. Repeated with key off.
The light is reset with a scan tool after the repair. There is not a button.