If I remember it correctly. YOU TURN THE KEY TO ''"ON"" POSITION. THEN DEPRESS THE DIESEL PEDAL 3 TIMES. (aka=the gas pedal) AND THAT SHOULD DO IT.
Dodge does not use inertia/ reset switches.
Dodge does not use inertia/reset switches.
No reset is necessary.
With a scan tool, after repairing the cause of the code.
turn key to "on" position (not running) depress the accelerator pedal 3 times and start vehicle ......warning / light should then be off
Dodge does not have reset buttons.Dodge does not have reset buttons.
What about the overdrive needs reset? If it isn't working, then you need to have the computer checked for codes, you need to check trans fluid. etc...
Take it to the Dodge Dealership and let them either change the sensor or reset the system for you.
With a scan toolWith a scan tool
A 2001 Intrepid does not have an oil change light.
That depends on the message. Oil change due is reset by turning the key on and pressing the gas pedal to the floor slowly three times. If the overhead reads anything else you will need to see the dealer for service.
No, Dodge does not use inertia/reset switchesNo, Dodge does not use inertia/reset switches