Want this question answered?
i tryed on my car it does not work pit light still on
Hold the trip button down for 5 seconds and kilometers will switch to miles along with Celsius to Fahrenheit on trip computer display.
The sensors are wheel position specific. They should reset themselves. If they are not in correct position they will not reset.
Fill your coolant to the level that it should be at. If it still comes on when the coolant is at its proper area, then it is an improper sensor. You will need to have it replaced immediately to reset the sensor.
When the car is on and in park, press the "Trip button" nunder the screen a couple times. When the oil change/tire rotation screen pops up, highlight the reset button next to oil change and press enter.Start the car push the trip button until you get to engine oil and select reset and you are done.
By replacing the front pads . they will reset automatically when the sensor sees the pads are ok.
If the tires are all at the correct pressure, then you have a failed sensor and will need to bring it in for service.
new tyre pressure sensor reset megane Sometimes resets if you blow up the tyre about 5 lbs above then adjust to correct pressure.
Just unplug the negative terminal of the battery for about 10 minutes and that will reset the computer
Button A = Button on the right of the centre display on the console Button B = Button on the left of the centre display on the console Ignition off. Press and hold down button "A" Ignition on. The word "SERVICE" will appear in the trip computer display Turn button "B" to the right to reset the display Turn Ignition off.
i need updated CD for 2004 ford expedition navigation
You can reset your 2004 Lincoln Town Car service engine light by scrolling to the oil life display. Hold the scroll button in until the oil life goes to 100 percent.