were is the location ecm on a 1996 Nissan maxima
This weekend I will be changing the ECM on a 2001 Maxima. I have a factory service book on a 97 Maxima and the computer in on the left side of the trans console. The side cover of the console has to be removed to get access to the ECM.
no ecm needs to be programmed to key fobs and updated
P1610 refers to NATS (Nissan Anti-Theft System) it is a lock code designed to keep the car from starting without the correct transponder key. For some reason the ECM isn't reading the chip in your transponder key. Either the key is damage your your ECM needs servicing.
call your local Nissan dealership they should be able to tell you
To the right of the gas pedal under the dash No, it is not. Removed center console and found TCM & BCM but no ECM/ECU.
unplug the 12v batt for at least 30's
where is the ecm locate on a Nissan altima 2.5s 2002
Unplug battery for 30 minutes then plug back on that will reset the ecm
First you have to locate ECM which is on the driver side just below the steering wheel and just right of gas pedal. You will be able to see ECM after removing a plastic cover. After that you will see a nut in that ECM, which needs to be turned clockwise and then anticlockwise. This is to be repeated three to four times with a span of 15-20 seconds. Next time you will start your car the annoying "Check Engine Light" should go away.
ecm location 2001 pathfinder
Disconnect the battery for 10-30 seconds or use error code reader to do the same thing.