you disconect the battery for ten minutes then hook it back up, if that does not work you have to have someone with a scanner clear the code.
Try this. Push and hold the odometer trip reset button while turning on the ignition but not starting the engine. Hold it for 5 seconds. This should reset the light.
Push and hold the odometer reset button while at the same time turning the ignition switch to the on position (do not start the engine). In about 5 seconds the light will go out and the system will be reset.
With the ignition off, push and hold the odometer reset button, now turn the ignition on without starting the engine. After 5 seconds the maintenance required light will go out and reset.
If you are referring to the maintenance required light, then press the odometer reset button and hold it while turning on the ignition switch to the on position. After around 5 seconds the light will reset. If you are referring to the red oil pressure light there is no reset. It is on because there is low or no oil pressure. Stop driving the car immediately or you will destroy the engine. If the oil level is full, Seek professional help.
Press and hold the odometer rest button while at the same time turning the ignition on without starting the engine. After 5 seconds it will reset.
1. Turn the ignition switch to the ON (II) position.2. Press the select/reset knob a couple of times until the engine oil lifeindicator is showing.3. Press the select/reset knob for about 10 secs. The engine oillife and the maintenance item code will blink.4. Press the select/reset knob for another 5 secs.The maintenance item code will go away and the engine oil life readingwill reset to 100.Same for Honda Accord 2009
That info can be found in the owners manual.
how to reset engine check light on 2009 murano
This is how it is done on a Honda Accord and your Element should be the same. Push and hold the odometer reset button in while at the same time turning the ignition switch to the on position without starting the engine. After 5 seconds the light will reset.
With the ignition OFF press and hold the odometer reset button while at the same time turning the ignition to the on position without starting the engine. After 5 seconds the light will reset.
With the ignition switch off, press and hold the odometer reset button in, then turn the ignition switch to the on position but do not start the engine. After around 5 seconds the maintenance required light will go out.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.