You must use a Diagnostic code scanner that can erase trouble codes.
Indicator lights on an Audi can be reset by a mechanic. The cars manual will also give instructions on how to reset this light as well.
When you first put the key in the ignition turn it to the on position but do not start it. and pump the gas pedal three times right away. Then wait about 10 seconds, then it should reset
If the warning lights go off in a Chevy Tahoe, it indicates a problem. In order to reset these lights the problem must be solved.
Warning indicators like a charging system indicator are not something that are "reset." If you have a indicator light that is on, that is a warning light. It's telling you something is wrong, in this case, it is saying that something is wrong with the charging system. It will go out when you get the problem fixed. Likely, you have an generator that is not charging or not charging well enough. If you don't get it fixed, it could leave you stranded somewhere.
reset engine light on 2005 Chevy Colorado 3.5 engine
read your owners manual
When warning lights go off on a car, it means that there is a problem to fix. To reset the lights, one must fix the problem, or they can use a scanner to reset it.
The engine light on a Chevy Colorado can be rest by connecting an OBD II reader to the interface port under the dash. Each code can then be reset which will disable the dash light until the error is detected again.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
You will need a reset tool to reset the service indicator on the Mercedes e240. You will reset the indicator by using the buttons on the dash.
My 2005 Chevy 4wd, ext. cab,shrt bed, has push buttons to go from(from top to bottom) Auto 4wheel drive, to 2 High , then to N(neutral), and then to 4 high, then to 4 low. At approx. 50,000 mi. the service indicator light came on and indicated "Service 4wd." I re-set the indicator, and forgot about it. Now, at 63,000 mi. it's telling me to service the 4wd, only this time the reset works until I turn the ignition off. when I restart, the service light comes on. However, the indicator lights that show which gear the transfer case is in, does not light up, and there is no automatic shifting of the transfer case. Is there a simple solution to this problem? Recommendations...Please! popo63
General Motors products do not use inertia/reset switches.