When you first put the key in the ignition turn it to the on position but do not start it. and pump the gas pedal three times right away. Then wait about 10 seconds, then it should reset
You must use a Diagnostic code scanner that can erase trouble codes.
Renault Service - computer controlled indicator. You may change oil by yourself, but the indicator won't change until it is reset digitally. What does this mean?
Turn on the key but don't start the engine. Push down and release the accelerator pedal 3 times. It will now reset.
Do not start, but turn the key on and push the gas pedal all the way to the floor and let off of it 3 times, then turn key off. Then start the truck. If it don't go off then repeat steps again.
Warning indicators like a charging system indicator are not something that are "reset." If you have a indicator light that is on, that is a warning light. It's telling you something is wrong, in this case, it is saying that something is wrong with the charging system. It will go out when you get the problem fixed. Likely, you have an generator that is not charging or not charging well enough. If you don't get it fixed, it could leave you stranded somewhere.
You change the oil
reset engine light on 2005 Chevy Colorado 3.5 engine
look in your owners manual but usually you turn the ignition key to the on position ( don't start ) and depress the accelerator pedal 3 times within 5 seconds to reset it.
read your owners manual
Oil change indicator will come on at 49 hrs for two hrs of operation than will reset itself.
Turn the key to on position, push the gas pedal to the floor three times, you should see the indicator screen flash, turn the key to off. You should be reset.
The engine light on a Chevy Colorado can be rest by connecting an OBD II reader to the interface port under the dash. Each code can then be reset which will disable the dash light until the error is detected again.