0
Turn on the key but don't start the engine. Push down and release the accelerator pedal 3 times. It will now reset.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you reset the Change Fuel Filter message on a 2005 Chevy Duramax?
Your truck will do this at a set milage just like your oil change message. To reset your oil change message with the key forward (not running) hit your gas 5 times (it may be 6) and a message will appear "oil life reset". To reset you fuel filter life with the key forward (not running) hold your gas and brake for 10 seconds or until the message comes up saying fuel filter life reset. But remember only do this if you accualy did change your filter. The other message your can get is water in fuel. This there is no reset. You have to reach under the fuel filter and crack the drain loose but it's usally better to just change the filter.
How do you reset the message center oil change in 99 Chevy Silverado?
turn the key to the run position and slowly pump the gas pedel 3 times and it will reset. Thanks JLamond219
How do you reset the oil change message in your 2007 Lincoln Town Car?
How do you reset the 'oil change required' message on 2007 Lincoln Town Car???
How do you reset the change oil message on a 2003 Chevy suburban?
tells you how right in the owners manual What they don't tell you in the manual is how to reset the message if you don't have the DIC. Press the gas pedal to the floor 3 times in 5 seconds with the key "ON" and the engine off.
How do you replace the front rotors on a 2004 Colorado 4x4?
reset engine light on 2005 Chevy Colorado 3.5 engine
How do you reset the message to change oil on 2005 Xterra?
How do you reset the message to service engine soon on 2005 Nissan terra
How do you reset the Maint required light on a 2008 Chevy Colorado?
read your owners manual
How do I Reset oil change message on 2006 Chevy Silverado?
Turn the key to the on position but do not start press the gas pedal 3 times within 10 seconds and the oil change light will flash 3 times and go out. now it is reset
How do you reset engine light on Chevy Colorado?
The engine light on a Chevy Colorado can be rest by connecting an OBD II reader to the interface port under the dash. Each code can then be reset which will disable the dash light until the error is detected again.
Reset oil light on 2002 Chevy impala?
See How to Reset the Change Engine Oil Message on page 6-18 of your "Owner's Manual", under Section 6: Service and Appearance Care - Engine Oil...
How do you reset the change oil indicator on a 2004 Chevy Colorado?
When you first put the key in the ignition turn it to the on position but do not start it. and pump the gas pedal three times right away. Then wait about 10 seconds, then it should reset
How do you reset oil change message on a Lincoln 94 mark viii?
press the reset button
