You cannot without special equipment. Your car will not allow even to program another key if you have just one working. You need two working keys to add another one. You can get it done at Ford dealer, but you would probably have to sell your wife and kids to pay for their services, or try cheaper alternative - autolocksmiths.
Depress clutch and press starter button to start engine, to stop engine just press start button.
no, installing a new engine will not reset the odometer, it's against the law to reset odometers.
turn off engine, and start again
With the engine off, press and hold the odometer reset pushbutton. Start the car. Keep finger on odometer reset pushbutton until "oil life" message starts flashing. Release the button.
how to reset anti-theft system to start engine
Acura CSX2006-2010Turn the ignition to (II) - do not start the engine.Press the SEL/RESET button on the steering wheel until you see the engine oil life display.Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.Select RESET by pressing the INFO (â–²/â–¼) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.Turn the ignition off and then start the engine to verify the indicator has been reset.
Resetting the maintenance LightSwitch the display to the trip meter A when the engine is running.Vehicles with smart key system:Turn the "ENGINE START STOP" switch off.Vehicles without smart key system:Turn the engine switch to the "LOCK" position.Vehicles with smart key system:While pressing the trip meter reset button, set the "ENGINE START STOP" switch to IGNITION ON mode (but do not start the engine because otherwise the reset mode will be canceled).Continue to press and hold the trip meter reset button until the trip meter displays "000000".Vehicles without smart key system:While pressing the trip meter reset button, set the engine switch to "ON" position (but do not start the engine because otherwise the reset mode will be canceled). Continue to press and holdthe trip meter reset button until the trip meter displays "000000".
Ignition coils for diesel engine glow plugs, wait for the symbol to go out on the dash, 10 secs aprox and then start the engine
disconnect the positive connector on the battery
I replace engine but now it wont start.
no. you might have to reset the clock and radio.
Push and hold the odometer reset button while at the same time turning the ignition switch to the on position (do not start the engine). In about 5 seconds the light will go out and the system will be reset.