answersLogoWhite

0


Best Answer

1 insert the key

2 press and hold both the "reset" and "select" buttons on the dash to the right side of the streering wheel

3 turn the key to on position, holding the button in but do not start the car

4 wait a (few seconds) until the maintenance req'd light goes off

5 start the car keeping the button depress

6 release the button after the car is started

7 done

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you reset maintenance light for Acura 3.2 TL?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Ford ranger code 32 how can you reset passanger air bag?

2005 ranger code 32 reset


Reset 2008 Toyota Corolla tire pressure light?

To reset the pressure light, first inflate the tires to the proper cold pressure (30-32 lbs, or as the sticker says on the door frame when you open the car door), and then hold the button in for five seconds on the pressure light.


How do you reset the low tire pressure light on a 08 dodge charger?

They are supposed to automatically reset once the pressure in each tire is above 32 psi - make sure all tire pressures are WELL above 32 psi and check the light. If it's still illuminated, there is likely a problem in the system - take it to a trusted mechanic and have them look at that system.


How many miles per gallon does a 93 Acura Integra get?

The furthest i went was 32 miles.


How do you reset tire pressure light in VW Passat?

I found this on another forum and it worked for my 2008 Passat. I initially filled the tires to 32 psi and it did not reset. Overfill the tires around 35psi. Start the car and the warning light and warning message should be gone. I did not have to drive or move the car, but others stated they drove a few miles above 40mph and the light went out when they came to a stop. Hope it works for you!


How do you reset low tire pressure light on 2010 Avalon?

The reset button is under your left leg, directly behind your knee air bag. It's a large black button with the tire pressure symbol next to it. Air your tires to the appropriate psi for the 93V or 94V tires. After your tires have the appropriate PSI (usually 32 psi), then press the reset and start your engine. The warning light may blink but should turn off within a few seconds; driving shouldn't be necessary, unlike many Hondas. If it still doesn't work, check your spare tire. I know, it went against my thinking, but my light didn't go off with 32 psi on my 2010 Avalon Limited. I checked the spare and it was at 28 psi cold (should be 35 psi?). Anyways, aired it to 32 psi, reset the button, cranked the engine and, what do you know, a few seconds later my warning light went off. Good luck to all those who read.


How much tire pressure for 2003 Acura 3.2TL S-Type?

Factory recommendation = 33 Front, 32 Rear


How can I reset my passcode on Archos 32 internet tablet without erasing anything?

To reset your pass-code on Archos 32 internet tablet if you lost it, without erasing anything, press on the gadget's power button or home button for until the Android logo appears, wait for the logo to disappear, and you will have the chance to reset your pass-code.


Do you have to drive 100 miles in order for the tire sensor to reset on a dodge charger?

No, they're supposed to reset almost immediately after the pressure in the tire gets above about 32 psi.


How many lemons do you need to power light?

32


What is walmart receipt item 32 wheels 001527272814?

It is a bag 32'' with wheels. Black one, very light.


Why is light still on after resetting button and filling tire?

I found tire light on in dash. Found tire had only 20# so I filled to 32#. Located tire reset button under dash on 2007 highlander. Light still on checked tire pressure still good at 32#. Low tire pressure indicator light remains on. This all happened today. This is not the answer........... I had same situation. The highlander went in to dealer for Brake Master Cylinder Recall on the seal . The brake fluid was slightly low . After the repair of the Master Cylinder Seal the Low pressure Light (Tire Pressure) has not been on since. Was it related ?