Want this question answered?
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
Check your owners manual
Reset as follows: with the ignition switch in the off position, hold in the hold in the trip odometer. Now turn your key to the on position and you will see a series of zeros or dashes begin to appear. Once that stops, your maintenance light will be reset.
This light comes on about every 5000 miles or so to remind you to change the oil. Reset as follows: with the ignition switch in the off position, hold in the hold in the trip odometer. Now turn your key to the on position and you will see a series of zeros or dashes begin to appear. Once that stops, your maintenance light will be reset.
how down the reset button approximately 15 to 20 seconds...then you would notice the maintenance lights flashes. at that time, just press the reset button once more. that's all to it.
With the ignition off, push and hold the odometer reset button, now turn the ignition on without starting the engine. After 5 seconds the maintenance required light will go out and reset.
Disconect battery for 5 minutes. Disconnect the battery for 5 minutes. Should reset engine light.
Not in the manuel, manuel-is closely guarded by MB for selfish reasons.....
Turn on Ignition - depress gas pedal 3 times
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
How do you reset 2008 honda element service light?
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.