With the ignition key off push and hold the odometer reset button and then turn on the ignition switch without starting the engine. After 5 seconds the maintenance required light will go off and reset.
The 2003 Honda 2.4 uses a timing chain. The timing chain will last the life of the engine.
With the ignition key off, press and hold the odometer reset button, and turn the ignition on and do not start the car. In about 2 seconds the light will reset.
Turn ignition on,need not running.Hold the reset button in until oil life xxx% blinking ,let go the button.Then hold it in again until it shows oil life 100%.
It would have to be removed from the dash and opened up in order to lubricate it. It is lubricated for life.
All 4 cylinder Honda Accords, model years 2003 and up have a chain that should last the life of the engine.
Turn ignition on,need not running.Hold the reset button in until oil life xxx% blinking ,let go the button.Then hold it in again until it shows oil life 100%.
There is no set mileage. You replace them when they wear out which may never happen. They normally last the life of the car.
Bring the oil life display onto your monitor. Hold the scroll button in until the oil life goes to 100 percent. This should cause your oil light to go off.
I recommend you go to your local Honda dealer and purchase Honda Long Life coolant.
The 2009 Honda Accord 4 cylinder does not have a belt. It has a chain that should last the life of the engine.
1. Turn the ignition switch to the ON (II) position.2. Press the select/reset knob a couple of times until the engine oil lifeindicator is showing.3. Press the select/reset knob for about 10 secs. The engine oillife and the maintenance item code will blink.4. Press the select/reset knob for another 5 secs.The maintenance item code will go away and the engine oil life readingwill reset to 100.Same for Honda Accord 2009
Turn key to on position with out starting. Press the select/reset knob until the "engine oil life indicator" is displayed. Hold down the knob for at least 10 seconds. The "engine oil life indicator" will blink. Hold down the select/reset knob for at least 5 seconds. The "engine oil life indicator" will be reset to 100%.