Want this question answered?
Try pressing the lock and unlock button together until you hear the horn beep once and that should work.
replace clock spring for airbag in streeing column.
If the Montero's horn sounds continuously when doors are locked with the remote, this is due a horn pad failure. To repair, replace the horn pad assembly.
The horn is on the Buffalo's head, on the reverse of the coin.
You've tripped the alarm system. You have to reset the alarm with the remote control fob and then everything will work fine.
You don't.
disconnect + on battery; when reconnected, you must reset alarm via trip switch (refer to your owner's manual regarding exactly how to reset -- for example, hold in button for xx seconds until alarm stops then release)
Does your horn actually work?? OR you might have dis-engaged the horn from working from your remote.....see your manual on how to engage it!
the steps is 1- Keep your hand on the switch for unlock the door 2- Make key switch on and off for 3 times without run the car only on then of 3- You will hear the horn one beep this mean you can start program the remote control 4- Then keep pressing the two switch at the same time for remote control lock and unlock for around 10 second until you hear the door is on remove your hands 5- then make key switch on you will hear the horn for 2 time this mean confirm program
Press it and the horn will beep a few times. It helps to locate your car.
Begin by removing the wiring harness from your 1996 Chevy Corvette horn. Remove the horn retaining bolts. Reverse the process to install the new horn.
Remove the wiring harness from the back of your 1995 Dodge Ram horn. Remove the horn retaining bolts. Reverse the process to install the new horn.