I had the same issue. This worked for me.
"With the doors closed put the key in the ignition. Hold down the trip odometer reset button. Turn the key to the on position. You will see the service indicator light (wrench). Press the minute adjustment button. Release the trip odometer reset button."
I tried the same thing on my 2009 Jetta and it worked! (I have over 60,000 miles on it and opted to have the oil change and fuel filter done outside VW) When I left the Service Now still came on. So when I got home I ran a search and found the answer. Thank YOU!
How do you reset 2008 honda element service light?
The tire pressure warning light on a 2008 VW Jetta City , parenthesis enclosing an exclamation point, can be reset once the pressure is restored. Press the set button on the dashboard.
take a hammer to the light
The light will reset itself if the system is working properly and the tires are at the correct pressure. If the pressure is correct and the light is still on, you need to take it in for service.
Hi I have cruiser 2008 gxr how is reset t.belt light
how do you reset check engine light in 2008 buick lucerne
Resetting a service engine light on a 2008 Volkswagen r32 requires a diagnostic tool to be done properly. Another way requires disconnecting the battery for 5 seconds or more.
I used this procedure to reset my 2002 s40 services light (it should work for 2008 s40 also). a) insert ignition key and turn it to the 1st click - no lights on bottom of the instrument panel should be light up b) press and hold trip odometer reset button, and turn the ignition key to the 2nd click - the row of lights at the bottom of the instrument panel should come on c) after about 5 secs the lights should go off except the Service reset light - it will blink d) when the Service reset light has blinked for about 3 times - release the odometer reset button e) the Service reset is complete Note: This procedure cannot be used to reset Check Engine light - it requires an OBD2 code reader.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
With the key in the ignition (but not turned), press and hold the Odometer Reset Button (0.0) on the right hand side of the panel. While still holding that button, turn the key (although not far enough to start the engine) and then press and hold the Minute button on the left side of the instrument panel. Release both buttons at the same time. Try to reset the light as close to the actual service time as possible, because you don't want to risk any problems or confusion.
Resetting an 2008 Audi A3 TDI service light can be done two ways. One by addressing the problem and the other way is to unhook the battery cables for up to a minute.
if your take it to a autozone tell them you have a check engine light and they will tell you whats wrong if anything and reset it take it to autozone and tell them your check engine light is on and they should reset it