Want this question answered?
the heater will not turn off. Nothing happans when I push the temp + or 1 button. thought I would try resetting the spot back to factory settings how I do that
If you have a sand or DE filter the setting is filter in the case of cartridge filters it is filter as always unless there are other settings for your particular setup.
Generally a pool pump "if it has settings" are either fast or slow. if it is the seatings on the top of the sand filter that are referred to these indicate what will happen with the water when it is on that settings. egfilter Refers to the water going through the filerbackwash Refers to the dirt being removed from the filter to wasterinse Refers to rinsing cloudy water out of the filter to waste after backwashrecirculate Refers to recirculating the water without filtrationwaste refers to running the water to wasteclosed
ZODIAC Pool products.
set timer zodiac lm2
The cleaning schedules varies from filter to filter, but a general guideline on any swimming pool filter is to take a reading when the filter is clean, then clean the pool filter when the pressure rises about 10 psi.
From the pool
A pool skimmer is generally built into the side of or around the top of a swimming pool in order to skim debris from the surface of the water. A pool filter is built into the plumbing in order to filter fine debris from the water itself.
Salt is not a filter, it is added to pool water to allow a chlorine generator to operate.
form_title=Pool Filter form_header=Pool service professionals are available to help you with all of your pool filtration needs. Are you having problems with the filtration system of your pool?*= () Yes () No Do you need a pool filter installed?*= () Yes () No Is your pool above ground or in ground?*= () Above ground () In ground Is your pool a chlorine or salt water pool?*= () Chlorine () Salt water
You don't have to change the pool filter for years Unless it gets damaged. You do however have to clean the pool filter whenever the presure leading to the filter gets too high. This indicates a dirty filter that is not allowing water to get through effectively.
The sand filter wont make a pool green this happens a s a result of algae.