1.Turn the ignition switch to the ON
(II) position. 2.If the engine oil life is not
displayed, press the SEL/RESET
button on the steering wheel
repeatedly the multi-information
tire pressure. 3.Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multiinformation
display. 4.Select ''RESET'' by pressing the
INFO ( / ) button, then press
the SEL/RESET button to reset
the engine oil life display. The
maintenance item code(s) will
disappear, and the engine oil life
will reset to ''100.'' If you want to
cancel the oil life reset mode,
select ''CANCEL.''
To reset "MAINTENANCE REQUIRED" light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition and hold buttons for 10 seconds until the indicator resets. works on 2003 mdx for sure.
The answer below is the correct answer...I just used it on my 04 MDX. Press and hold the select and reset buttons on the right side of the guage cluster. Turn the ignition to run (II), the light will flash once, then stay on steady. Hold the buttons with the ignition in run until the light turns off.
By putting air in the tire(s) that need it.
Have vehicle scanned to determine problem and have codes cleared
Follow this link for complete instructions: http://www.geocities.com/myintegra96/srs.html
The 2007 Acura MDX has a V6 engine.
The 2007 Acura MDX has 24 valves.
Means the vehicle needs an oil change or other maintenance. Newer models also show a code like "B16" which will indicate what maintenance is needed. There are instructions in the manual on how to clear the light. However, you should do the maintenance yourself or have it done at a shop as soon as you can.
The 2007 Acura MDX is a gas-powered vehicle.
The 2007 Acura MDX has a 5-speed shiftable automatic.
The 2007 Acura MDX's turning circle is 37.6 ft..
The 2007 Acura MDX has single overhead cam (SOHC).