Nissan
Nissan Frontier
Nissan Maxima

How do you reset the alarm in a Nissan?

838485

Top Answer
User Avatar
Wiki User
2016-06-28 09:13:36
2016-06-28 09:13:36

Nissan vehicles can have two types of security system. They commonly have an alarm and an immobilizer system. The alarm provides visual and audible alarm signals when someone breaks in, or simply opens the doors or trunk when the system is enabled. Nissan systems are not motion detection types. The Nissan alarms aren't triggered by vehicle movement or vibration. The immobilizer system functions through the use of a registered key. They are two distinct systems.

  • Enable the alarm. Close all the windows; remove the key from the ignition switch; close and lock the trunk lid and all the doors. You can use the keychain remote control to set the alarm--just press the locked padlock icon.

  • Listen for the indicator that the doors are locked. The hazard lights will flash and the horn will sound. The system will arm itself 30 seconds after the locked padlock icon button is pressed.

  • Disable the alarm. Unlock the driver's door or the trunk lid with the key.

  • Or, disable the alarm by pressing the unlock button--the unlocked padlock icon--on the keychain remote.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

unlock the doors manually and it should reset your alarm.

User Avatar

Not sure if it's the same but on a J30 and Nissan Maxima you put the key in the truck luck and open it. That turns off the alarm.

User Avatar

How do you reset the alarm for a Ford Laser

User Avatar

The alarm is reset with the remote or by unlocking the door with the key.The alarm is reset with the remote or by unlocking the door with the key.

User Avatar

The alarm is reset by unlocking the doors with a key or the remote.The alarm is reset by unlocking the doors with a key or the remote.

User Avatar

consult the instructions that came with the alarm. these trucks did not come with one, therefore it has an aftermarket unit. give more info about what alarm you have, and somebody may be able to help.

User Avatar

To reset an alarm system on a 2005 Honda Civic locate the brain. The brain should have a reset button located on it. Press it to reset the alarm.

User Avatar

how to reset hornet alarm,, cause my car can't start..alarm still active,,

User Avatar

To reset the alarm on a Volvo S90 you will need the key alarm. Press the lock button on the key alarm. Next press the large button the key alarm. The flashes that you see on the LED is confirmation that the alarm has been reset.

User Avatar

The factory alarm does not have a reset button. An aftermarket alarm may have a reset. It could be located wherever the installer put it.

User Avatar

How do you Reset the alarm on a 1998 Camaro Z28? If I set the alarm it will go off moments later. I was hoping a reset would fix this issue.

User Avatar

The factory alarm is reset by unlocking the doors with a key or the remote.The factory alarm is reset by unlocking the doors with a key or the remote.

User Avatar

The factory alarm on a GMC Sierra pickup truck can be reset by removing the fuse. Take the fuse out for 10 seconds and replace it. This will reset the alarm.

User Avatar

The factory alarm is reset by unlocking the doors with a key or remote.

User Avatar

if you have a factory alarm..you will need a power remote to reset the alarm. or you can reset the alarm be using the key in any of the door locks or in the rear hatch lock . just cycle the key to the unlock position to shut alarm off. to reset alarm to armed use the door lock power switch to lock the door then shut door and alarm will reset to on .

User Avatar

The OEM factory alarm systems have a procedure that is used to reset the alarm. To do so, turn the key to on position and press the lock/unlock button. Do this three times in five seconds and the alarm with be in program mode. Here the alarm can be reset.

User Avatar

No, there is not a reset button on the Nissan Xterra. However, there is a reset button on the clock in the Nissan Xterra to change the time. To reset the car, a technician would have to use their computer.

User Avatar

How do you reset nissan 2002 frontier transmission?

User Avatar

how do i disable my car alarm on a 2004 nissan Murano sl

User Avatar

The factory alarm is reset with the remote or by unlocking the door with the key.

User Avatar

Fix the problem with the air bag system and the alarm will reset itself.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.