Want this question answered?
how to reset the brake service indicator on mini cooper s 2011
You do not mention the year and this important as the procedure is different from the 1st generation MINI to the 2nd generation.
How do you turn the brake indicator off on mini cooper s 2008?
When the Mini cooper 2003 airbag light is permanently on, then it needs to be reset.
The brake wear indicator is a non-reusable sensor that is installed in the brake pad. If this sensor is activated then the entire sensor must be replaced. Parts are available on-line if you are not close to a MINI dealership. After the worn sensor is replaced, you turn the key to position II without starting the car and wait for the light to reset. The sensor can be replaced without removing the caliper.
Buy the oxygen sensor and fix the car and get the light reset !
For Example: On a 2004 Mini Cooper S - After a brake service/repair has been properly completed (including replacement with a NEW wear sensor) The brake wear indicator light on the instrument panel can be re- set (turned off) by: 1)car in NEUTRAL and the parking brake OFF 2)WITHOUT STARTING THE ENGINE 2)Turn the key ignition to position 2 while holding down the brake petal. The light (if by magic) will turn off (after about 15-20 seconds). If it does not - continue to hold down the brake pedal until the light does go turn off. It may take a little longer.
The abs light is on because there is a problem with the abs. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.
if no one knows go to google.
The sensible way would be by having it serviced.
If you mean the Flat tire indicator button, it's next to the parking brake.
On my car it means the emergency brake is on