To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the totalaccumulated mileage of the vehicle (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the switch down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
how do you reset the check engine light on a 2005 Toyota tundra
The check engine light has nothing to due with an oil change.
Resetting the oil light on a Toyota Corolla Verso is very easy to do. You just need to take the battery cables off the battery for a few minutes and then put them back on. This will reset the oil change light.
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
To reset the reminder light on a Toyota, you need to turn the ignition key forward without starting the vehicle. You then need to pump the gas peddle 3 times within 10 seconds and it will reset the reminder light.
To reset the T belt light in Toyota kindly see your manual or take it to a Toyota accredited car dealer.
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
how to reset oil timing on 1990 toyota
How do you reset maint read light on 2010 corolla
It probably needs to be reset after the oil change. New vehicles use the oil light to let you know you need to change the oil, but they need to be reset at the time of the change.
my2003 toyota corolla the airbag light is on