Want this question answered?
for ecu reset must disconnect cable battery for 45min and reconnect battery cable and start the engine
disconnect the battery for 45mins, with the doors closed. After 45mins reconnect the battery and open the drivers door and you should hear a beep. your ecu will be reset. then take it out for a drive trying to keep to around 2000-2500rpm for the ecu to calibrate to the parameters.
How can you reset an ECU on a Kia Sedona
There is no ECU reset button.
you push the reset button on the back of the ECU.
Yes it will make your life much easier to have the turbo ecu and harness. The turbo injectors have a resistor pack that the non-turbo engines do not use. So that would have to be manually wired in to use stock turbo injectors and ecu.
Depends on how the ECU controls the turbo. If the ECU never lets the wastegate open, the turbo may overspin, which will damage it. On Audi/VW cars, a bad tune can cause an overlean condition, which melts the wastegate flapper door. This will cause your turbo to not boost.
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
Yes
Depend the number of the ecu and year of the car, general you can reset it, just recoded. The other option is, change the ecu and reset the ews and then you can redode the imobilizer with software machine. www.autocentralinas.com
Have the ECU scanned with an OBD2 scan tool and then repair the problem. You can then try to reset the ECU by removing the negative battery cable for 5 minutes which may or may not reset the ECU. If it does not, it will have to be reset with the scan tool.
ECU defekt.