you will find the inertia switch under the bonnet, located on the left hand side strut mounting, its a square looking plastic device with a round rubber top, either red or black in colour, turn on ignition to point 2, then press this for 5 seconds, turn off ignition and hey presto.
To reset the engine management light on a Citroen Picasso, press and hold the trip reset button. Turn ignition key to position 2. By keeping the button pressed in, the trip meter will count down. When zero is reached, release the trip button and the start car service light will be extinguished.
how to reset the parkig sesor on a picaso desire
Yes. Press and hold the end button on the wiper stalk and the unit resets!
You press and hold down the trip reset and then turn on the ignition. The LCD odometer display then counts down and when gets to zero the service reminder has been reset. This also works on a Picasso.
Disconnect the battery for half an hour - that normal sorts out a multitude of electrical problems (ie radio will not turn off etc)
To reset the electric immobilizer you must put the key into the ignition and slowly turn it. You should see the lights in the car start to turn on. It does not work if you turn the key too fast.
Temperature guage cannot be reset, you will have to get a new one, or if you are lucky, the wiring may just be faulty, ie: worn through in the door jamb, or in the mirror itself, relitavely easy fix
Apparently you turn ignition on, press and hold lock button for 5 seconds, turn off and remove key, wait 5 seconds, then try it.
Hi push the mileage reset button, turn ignition to the las position but don't stat the car. you will notice that's its couwnting down than release thanks
how do you reset key fob on citreoun c2
You can reset the immobilizer on a Citroen C4 in one easy step. Simply insert the key into the ignition and turn it very slowly.
To reset the service indicator Citroen C3, push the button on the instrument panel. Hold it for 10 seconds while turning on the ignition.