first you have to this when your car is not on. turn the ignition switch for power and the bottom button that has an arrow on it press this until you see reset oil life and press
To reset the oil life in the display press and hold down the reset button for 3 to 5 seconds. This works for the GTP. Hope this helps. "G"
Scroll to the engine oil life display. When you are on the engine oil life display, hold in the scroll button until the engine oil life goes to 100 percent.
Keep pressing the reset button until you see the Oil life % on the display. Once you have that, then hold the reset button in until the display flashes. Let go for a second and then press and hold the reset button again until the display changes to 100%.
With the key, turn the ignition switch to ONPress the SEL/RESET button (on the steering wheel) until the Multi-Information Display presents the Oil Life %Hold down the SEL/RESET button for 10 seconds and the display will change to offer an option to reset the Oil LifePress the Up/Down Arrow button on the steering wheel until "RESET" is highlighted on the displayPush the SEL/RESET button and the Oil Life will reset to 100% and the Service Due indication will disappear
With the key, turn the ignition switch to ONPress the SEL/RESET button (on the steering wheel) until the Multi-Information Display presents the Oil Life %Hold down the SEL/RESET button for 10 seconds and the display will change to offer an option to reset the Oil LifePress the Up/Down Arrow button on the steering wheel until "RESET" is highlighted on the displayPush the SEL/RESET button and the Oil Life will reset to 100% and the Service Due indication will disappear
On my aurora, I just hold in the reset button.............
You will find a push button protruding from the instrument cluster. It is used to switch between odometer, trip A odometer, trip B odometer and the oil change life indicator. Each time you push the button, a different display is shown. Turn the ignition ON but don't start the vehicle. Select the oil life display then PRESS AND HOLD the button in for 5 seconds. The display will be reset to 100 (%).
You can reset the oil light by scrolling to the oil life display. Once on the display, hold the scroll button in until the oil life goes to 100 percent
Hold down both buttons where you get to the oil life function, and it should reset itself to zero.
You can reset the change oil light on your 2010 Nissan Ultima by going to the oil life display. When the oil life display is illuminated hold in the checkmark button until the oil life goes to 100 percent.
You can reset the service light by bringing of the oil life monitor on your display. Hold the scroll button in until the oil life goes to 100 percent. This should reset your service light.
Press the STATUS control to access the System Check function, the message center will display A/C FILTER XX% RESET FOR NEW. Press and hold the RESET control to set to 100% , the message center will display IF NEW FILTER HOLD RESET. After a successful reset, the message center will display A/C FILTER LIFE SET TO 100%.