0
After an oil change, to reset the oil life monitor, you turn on the ignition, but do not start the engine. Then you slowly depress the accelerator pedal to the floor and release, slowly too, three times.
It seems to me, that often I have to repeat it, not sure if I am doing it too slow or too fast.
What else can I help you with?
What is the red reset button for in the fusebox of a 1998 Oldsmobile Intrigue and how does it work?
It resets the 'Oil Life Monitor'. After changing the oil, hold it down for a few seconds until something beeps or flashes on the dash.
Can you reset a 2001 Oldsmobile Intrigue computer without disconnecting the battery?
Yes, with an OBD II reader. Disconnecting the battery won't reset it.
How do you reset the change oil light in a 2000 Oldsmobile Intrigue?
To reset the change oil light in a 2000 Oldsmobile Intrigue, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn the ignition off and back to the "ON" position to check if the light has reset. If the light is off, the reset is successful.
Where is the fuel reset switch on an Oldsmobile Intrigue?
If you're talking about a Ford-style fuel cutoff switch... there isn't one.
How do you reset the traction control light on 2001 Oldsmobile intrigue?
To reset the traction control light on a 2001 Oldsmobile Intrigue, first, ensure that the vehicle is in good working condition, as the light may indicate a system issue. You can start by turning off the ignition, then disconnecting the battery for about 15 minutes to reset the system. Reconnect the battery and start the car; if the light persists, it may indicate an underlying problem that needs to be diagnosed with an OBD-II scanner. Always consult the vehicle’s manual for specific instructions or seek professional assistance if needed.
Where is the reset switch for the fuel pump on a Oldsmobile intrigue?
reset swith is usually under floor mat high up under dashboard on driver side GM vehicles do not use inertia/reset switches.
HOW TO DISENGAGE THE SECURITY SYSTEM ON MY OLDSMOBILE INTRIGUE?
To disengage the security system on your Oldsmobile Intrigue, insert the key into the ignition and turn it to the "On" position without starting the engine. Wait for about 10 minutes until the security light turns off, indicating that the system has reset. If the light remains on or the car does not start, you may need to use a spare key or consult your owner's manual for specific troubleshooting steps. If problems persist, consider seeking assistance from a professional mechanic.
How do you reset the security after changing out an ignition for a 2001 Oldsmobile intrigue?
You need an auto locksmith-look for one that's mobile on Craigs under services.
How do you reset pcs light on dash of 2000 olds intrigue?
To reset the PCS (Powertrain Control System) light on the dashboard of a 2000 Oldsmobile Intrigue, first, ensure that any underlying issues are repaired. Then, disconnect the negative battery cable for about 15 minutes to clear the trouble codes. Reconnect the cable and start the vehicle; the PCS light should be reset. If the light returns, further diagnostic work may be needed to address any persistent issues.
How do you shut off the security on a 1999 Oldsmobile Intrigue?
Its in your manuel. Turn key to start wait ten mins and then turn off then turn on it should reset. if not take to dealer.
Can you reset the driver information system on your 2006 Pontiac G6?
how do you reset the tire pressure monitor for the g6 2008
Fuel shut off reset for Oldsmobile Bravada?
Oldsmobile vehicles do not have inertia/reset switches.
