Geo Prizm
Radio

How do you reset the radio codes on a 1996 Geo Prizm?

161718

Top Answer
User Avatar
Wiki User
2008-06-26 19:52:40
2008-06-26 19:52:40

If your radio is displaying "Loc" and you cannot remember or know the 4 didget code to unlock it, you can take it to a local Chevy dealer and they should be able to unlock it for a small price as this happened to me.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Mine was reset when the radio says "code" by entering 2456 on radio channels

User Avatar

Have vehicle scanned to determine the problem and have codes cleared

User Avatar

belt diagram for a 1996 Geo Prizm

User Avatar

If you mean reset the computer: remove the battery negative cable for a few minutes.If youhave security codes on the radio write them down before removing the cable. Replace the cable and the ECM should be reset.

User Avatar

There is no reset on a 1996 Chrysler Sebring.There is no reset on a 1996 Chrysler Sebring.

User Avatar

After repair, you use a scan tool or you unhook battery.

User Avatar

Yes I need the code to reset the radio in 1996 e class 320

User Avatar

try a local parts store some of them read the codes for free and will reset them for you otherwise you have to take it to a garage.

User Avatar

Go to http://autos.msn.com/ and put in geo/prizm... then look up the year of the prizm...1996... click on features and specs. Scroll down, and you'll find the horsepower of a 1.6 liter 1996 geo prizm. I found it to be 100 horsepower.

User Avatar

Radio unlock codes are specific for each individual radio. You will have to remove the radio and find the serial number. Call the dealer with this information and they can give you the code.

User Avatar

No. A 1996 Plymouth does not have a reset switch.

User Avatar

the answer is no if you clear the it will only default again you have ac compreser problem

User Avatar

Fix the problem and hook up a tech 2 to it and clear codes

User Avatar

The old fuse is for interior lights and radio memory. It does not feed engine management. There should be nothing to reset.

User Avatar

It does not have a reset.It does not have a reset.

User Avatar

I have a 1996 Prizm, and it has a 10 Gallon tank. Yours is most likely the same.

User Avatar

Probably 10 gallons (I own a 1996 Prizm with a 10 gallon tank).

User Avatar

it is inside the cover of the fuse box, just type in the code and you are good to go

User Avatar

The service engine soon, or check engine, light is reset with a scan tool after repairing the cause of the trouble codes.

User Avatar

If your battery has been disconnected recently (and therefore your radio has been reset), you may find the code has reverted to the factory setting: 1111.

User Avatar

have you checked your motor mounts?

User Avatar

Take it to a mechanic, and have them erase the codes. Auto zone and advance will not do it as they are not mechanics

User Avatar

where is the reset sistem buttomfor Pontiac 1996


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.