with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
To reset a VW Lupo Beta radio, first, turn the ignition on without starting the engine. Then, press and hold the "TP" and "RDS" buttons simultaneously for a few seconds until the display shows "CODE" or clears. If a security code is required, enter it using the preset buttons. After entering the code, the radio should reset and function normally.
To recode the radio in a Renault Espace, first, turn on the ignition and the radio. If it prompts for a code, you will need the security code that came with the vehicle or the radio's manual. Enter the code using the preset buttons on the radio. If you enter the code incorrectly multiple times, the radio may lock, requiring a reset or assistance from a dealer.
The code to reset the radio is specific to your car. No one will know that code. If you cannot find the code written down somewhere, contact your Buick dealer for instructions on how to get the code. The radio may need to be removed to get the radio serial # and with that the code, or the selling dealer may have it on file.
By taking the cable off battery putting back on reset code
To reset the radio in a 2012 Kia Sorento after replacing the battery, turn on the vehicle and the radio. If it displays a "Code" or "Error" message, you'll need to enter a security code. This code is typically found in the owner’s manual or provided with the original purchase documents. If you don't have the code, you may need to contact a Kia dealer for assistance.
By using the radio preset buttons to insert the 5 digit code. If you do not have the code click the link, sign up at the Honda Owner's Link, and then click get radio code.
Power the radio, and then enter the anti-theft code using the preset numbers at the bottom of the radio. If the anti-theft code is unknown, contact Honda with the 17-digit vehicle identification number.
Howdo i reset my radio security code ml 500 2002
To unlock a radio you must input the radio code. This is done using the preset radio station buttons on the face of the radio. Contact your dealer for more info on your radio code if you don't have it.
The reset code is specific to the radio. Look in and on the glove compartment for the code and in the owners manual. If it is not there you need the serial number of the radio and have to call the dealer for the code.
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
To reset the radio code on a 2002 Mercedes SLK 320, you typically need to turn on the ignition without starting the engine, then turn on the radio. If the radio displays "CODE," you can enter the code using the radio buttons. If you don't have the code, you may need to refer to the owner's manual or contact a Mercedes dealership for assistance, as they can provide the necessary code based on your vehicle's VIN.
You insert the code with the radio presets. Just push the reset # that corresponds to the radio preset. If you have locked the radio up just leave it on for a few hours and it will reset so you can enter the code again.
Enter the 5 digit code into the radio using the presets. If you do not know the code click the link I will post and register your vehicle at the Honda Owners Link. There you can get the code for free.
To insert the radio code in a 2009 Kia Sorento, first turn on the vehicle and the radio. If the radio displays "OFF" or "CODE," press the power button until "CODE" appears. Use the preset buttons (1-4) to enter the code: press the corresponding button for each digit of the code, then press the "AM/FM" button to confirm. If entered correctly, the radio will unlock and start functioning normally.
Mine was reset when the radio says "code" by entering 2456 on radio channels