This worked for me: open the car with the door key. Sit in and shut the door. Now operate the door lock using the lock tab on the drivers door four times very quickly ((lock then open four times). Press the close button on the fob. If the door locks again, you've done it. May well work for other cars too.
How do reset security code on a daewoo laganza
The only way [ know of is to have the factory code that comes with the car. If you get lucky i have found it written in the owners manual.
Disconnect battery and leave for about 10 min. Then reconnect. The check engine light went away on mine.
http://www.mobileinformationlabs.com/Remote%20Program%20Pay%20Page.htm
Perhaps throttle plate is stuck? I have a Could 1997 Daewoo Leganza, every now and then the car goes into high revs each time I start it up, what I do is unhook the battery over night and this works, seems to reset some sort of sensor.
Try SPASTICPUPPY.NET.
You might need to programming the remote. Their should be instructions in the users manual. You're remote could also be need new batteries.
You might need to re-programming the remote. Check instructions in the users manual. The remote could also be need new batteries.
get a Auto electrican to sort it out I do not think you can reset it
You have to have the factory do it, or a locksmith. (thats for resetting the remotes and codes)if you just want to reset it then unplug the battery for 10 mins then hook it back up
The alarm is reset with the remote or by unlocking the door with the key.The alarm is reset with the remote or by unlocking the door with the key.
It is no BIG deal. All you have to do is rewire the whole thing. Follow the instructions in the owners manual for resetting the remote. The remote entry transmitter in GM vehicles must be reset when you replace the battery. Usually that consists of standing near the vehicle and holding the remote entry for about 10 to 15 seconds, but refer to the owners manual to make sure.