0
What else can I help you with?
How do you reset the oil light in an Oldsmobile bravada 2002?
To reset the oil light in a 2002 Oldsmobile Bravada, first turn the ignition key to the "On" position without starting the engine. Then, press the accelerator pedal three times within five seconds. This should reset the oil change light. Finally, turn off the ignition and restart the vehicle to ensure the light is no longer illuminated.
How do you reset the service engine light on a 1999 Oldsmobile Alero?
turn off engine, and start again
How do you reset the check engine light on a 1994 Oldsmobile Bravada?
You can disconnect the negative battery cable, wait a couple minutes then reconnect the cable. This will clear the codes and reset the check engine light but, if the reason the light came on isn't fixed the light will come back on soon.
Where is fuse for dome light on 1997 Oldsmobile Bravada?
Dome light fuse for 2004 Bravada is fuse#4 (10amp) in fuse box underneath back seat on driver's side
1999 Oldsmobile Intrigue Service engin soon?
What does 'service engine soon' light mean on a 1998 olds intrigue?
How do you troubleshoot a service engine soon light on a bravada?
Have the ECU scanned with an OBD2 scan tool. This will retrieve the code which will tell you what part is being effected.
Service engine soon light cutlass supreme?
The service engine soon light on an Oldsmobile Cutlass Supreme notifies the driver that it is time to change the oil. It is trigger around the 3,000 mile mark at regular intervals.
How do you get the service engine light to go off on a 1999 Oldsmobile alero?
Have vehicle scanned to determine the problem and have codes cleared
What kind of problem is a broken evap service port on a 1999 Oldsmobile alero going to give you?
check engine light
How do you reset check engine oil light on a 2002 Oldsmobile Bravada?
I just had an oil change and the guy turned the key on (did not start car). Pumped the gas pedal three times simultaneous. Repeated with key off.
How do you reset service engine soon light on 1992 Regency Oldsmobile?
To reset the "Service Engine Soon" light on a 1992 Regency Oldsmobile, you can first disconnect the negative battery terminal for about 10 to 15 minutes. This will clear the engine codes and reset the light. Alternatively, if you have access to an OBD-I scanner, you can use it to read and clear the trouble codes, which will also turn off the light. After resetting, ensure that any underlying issues are addressed to prevent the light from coming back on.
How do reset the ignition timing for a Oldsmobile bravada 4.3 liter?
To reset the ignition timing on a 4.3-liter Oldsmobile Bravada, first ensure the engine is at operating temperature and then turn it off. Disconnect the timing connector, usually located near the distributor, to enable the timing adjustment. Start the engine and use a timing light to check the timing mark on the harmonic balancer against the timing tab. Adjust the distributor until the timing is set to the specified value, usually around 0 degrees BTDC for this engine, then reconnect the timing connector and turn off the engine.
