0
What else can I help you with?
How do you reset the check engine light on a 1994 Oldsmobile Bravada?
You can disconnect the negative battery cable, wait a couple minutes then reconnect the cable. This will clear the codes and reset the check engine light but, if the reason the light came on isn't fixed the light will come back on soon.
How do you check the check engine light on a 2000 Oldsmobile intrigue?
With a scan tool.
Why would check engine light blink on my Oldsmobile cutlass?
Probably because you need to check the engine.
Were is the reset button for the check engine light for a 2000 Olds Bravada?
The light is reset with a scan tool after the repair. There is not a button.
Why does check engine light come on and auto stalls this is a 1994 Oldsmobile royal?
Use a code reader to find out why the check engine light is on.
How do you reset the oil light in an Oldsmobile bravada 2002?
To reset the oil light in a 2002 Oldsmobile Bravada, first turn the ignition key to the "On" position without starting the engine. Then, press the accelerator pedal three times within five seconds. This should reset the oil change light. Finally, turn off the ignition and restart the vehicle to ensure the light is no longer illuminated.
When the check engine light comes on what could be the problem on a 1994 Oldsmobile royal 88?
If the check engine light is on, use a code scanner to find out why.
The check engine light is on my 199 Oldsmobile intrique?
take it to autozone and have it scanned
How do you clear the check engine light on a 1998 bravada?
After repairing the cause of the code, you clear the code with a scan tool.
Where is fuse for dome light on 1997 Oldsmobile Bravada?
Dome light fuse for 2004 Bravada is fuse#4 (10amp) in fuse box underneath back seat on driver's side
What does it mean when the check engine light is on in Oldsmobile delta 88?
The engine computer has detected a malfunction and set a code.
How do you reset the check engine light on a 1998 Oldsmobile Bravada?
After you have fixed the issue that caused your check engine light to come on, you can use a pocket scanner to erase the code, but this causes your computer to reset and during an inspection will cause many unready codes failing the inspection. You must drive your bravada 5 miles at a non-stop 55miles an hour to clear the computer, sometimes it just takes a few days of driving to get the reset to clear all codes but normally the 5 miles at 55mph will do the trick.
