remove positive battery cable wait about 20 seconds after you change oil it should go out If this is the same as my 2002 GT, the Change Oil Soon light goes out when you turn the key on but not start the car and pump the gas pedal three times within 7 seconds, the light will flash after about three seconds, wait for that and then shut the key back off. Now, start the car and the light should go out.
How to reset service light on a 2004 grand am
There are a couple of ways to reset the Service Engine Soon light on a Suzuki Grand Vitara. The easiest way is to get a scan tool from your local auto parts store. Using the scan tool will reset the service engine light. Disconnecting your vehicle's battery is another way that often works to reset the Service Engine Soon light.
To reset the service light on a Grand Scenic 54 the engine's computer should be reset. An easy way to reset the computer requires unplugging the battery for 5 seconds. The computer will then reset.
reset service engine light
A reset Engine Service Light comes on when an issue comes up with in the engine. This light can be reset by a tech or by fixing the problem.
reset service engine light on BMW 325
How do I reset the service engine light on a 2003 Chevy Trailblazer?
To reset a Service Engine Soon light, a person can disconnect and reconnect the battery. They can also fix the problem and use a scanner to clear the codes causing the light to come on.
how do I reset my service engine light on my 1999 ford f150
The light is one because there is a problem with the emissions system. Once the problem is corrected the service tech will reset the light.
need to reset the computer go to auto zone and they will usually do this for free but just tell them you have a check engine light on
Check engine light is reset with a scan tool.Oil change due is reset by pressing "step" until "0 miles to service" is displayed. Then press and hold "reset" until it resets.
You can disconnect the neg. battery cable but you also reset everything radio, clock etc.
unhook positive batery cable for 5 mins
reset after the engine oil / filter change, service
The service engine light has to be reset with a scanner. Disconnecting the battery will not work. The light will come back on unless you make the necessary repairs.
The service engine or check engine light can be reset with a scan tool or by unhooking the battery. The light will return if the failure that caused the code is not repaired.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
The service engine soon, or check engine, light is reset with a scan tool after repairing the cause of the trouble codes.
The service engine soon is the same as a check engine light. It has nothing to do with an oil change.
Have the engine controller checked for faults then serviced and the light turned off. Take it to the dealer.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
I reset the check engine light on my jeep by disconnecting it from the battery.
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
I was told by a co-woker that if you disconnect the negative battery cable for about 20 minutes or so that will reset the service engine light.