Want this question answered?
get on driver seat & look for two things. 1st: Check button (located on indicator stick) 2nd: reset button (small black stick button located on left side of the speedometer) Move the key to the ON position where all the lights turns ON but the car doesn't start. Push & hold the reset button until you see the service icon appears. Now press the check button couple of times until you see the brake fluid icon. Once the brake fluid icon appears press & hold the reset button again until the RESET icon appears. As soon RESET icon appears press & hold the reset button again until you see the new milage.
Icon Loft was created in 2007.
Icon for Hire was created in 2007.
1) Ensure ignition key is turned off. 2) press and hold the odometer reset button whilst turning the ignition switch to the on position. 3) Keep the odometer reset button pressed for 10 seconds whilst the service display counts down from 10 to 0. When the count down reaches zero the spanner icon will vanish from the display and the service indicator will be reset. Should work that's what one of my friends tried and it worked for him let me know if it does.
Def Jam Icon - 2007 VG is rated/received certificates of: USA:M
Hi. What icon (!) on a panel or computer message TIRE PRESSURE TO LOW?
Click on the Office icon on the top left and click save.
To hard reset a ZTE prelude, go to settings and tap the "backup and reset" option. Select the "Factory data reset" icon and confirm the action. A hard reset will erase all the personal user data such as contacts.
press the menu icon, go to settings, go down to security the go to master reset and the password is 0000
Hit the start button and tap on the cog icon. There should be a button that says "Reset Data". Hope this helped.
Open the fuse panel which is located between the dash and the front door. there you will find a red reset button. Turn the car to on and press the button and let off. On the dash you will notice an icon flashing. If the oil icon is not flashing Push the red button again until the oil icon flashes. Then push the reset button and hold. The light will go off.
To hard reset a ZTE prelude, go to settings and tap the "backup and reset" option. Select the "Factory data reset" icon and confirm the action. A hard reset will erase all the personal user data such as contacts.