0
How do you reset the service indicator after an oil change on a 2000 BMW z3?
Wiki User
∙ 14y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Reset oil indicator 2000 BMW 323i?
The reset oil indicator on a 2000 BMW 323i warns the driver that it is time to service the engine. It is automatically set to trigger every 3,000 miles and can be reset once the oil has been changed.
How do you reset the performing service light indicator on a 2000 Jeep Cherokee?
Key on, close doors. Press "step" until "0 miles to service" is displayed. Press and hold "reset".
How do you reset service indicator message for 2000 Mercedes Bens E240 after b is complete?
Most likely the same as the 2000 E430 which is as follows: turn key to position 1 press up or down arrow til service indicator appears press and hold (R) button for approx 2 seconds display will show "do you want to reset service interval?" press (R) button again to reset Hope that works for you.
How do you turn off the perform service light on a 2000 jeep grand Cherokee?
you reset it by hitting step until you see "miles remaining to service" then you hold reset button and it will change to 3000
Reset service engine soon light on 2000 Nissan?
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
How do you reset service light on ml 320 mercedes 2000?
I did the oil change on my 2000 ml 320 but the dash still displaying -10 D and i have tried to do the reset following the procedurs but the two little wrenches are there and
How do you reset the air bag indicator light on a 2000 Ford Expedition?
abdulla breikachi is fat
How do you reset the service indicator on a Transporter?
To reset a T4 Service indicator. With ign off, press and hold trip mtr butto. Switch ign on and release the button. If only "insp"is in the display, turn minutes knob to right on the clock, "service ----" should now appear in the display. Turn off ign and service is reset. If "insp and Oil" are shown in the display, get to insp by toggling the trip mtr button. follow above procedure, but don't yet turn off the ign, press the trip mtr button again and "oil" should appear, again turn the minutes knob to the right and "service----" will appear. Turn ign off and service is reset. Works for me on my 2000 T4.
How do you reset the service indicator on a vw transporter?
To reset a T4 Service indicator. With ign off, press and hold trip mtr butto. Switch ign on and release the button. If only "insp"is in the display, turn minutes knob to right on the clock, "service ----" should now appear in the display. Turn off ign and service is reset. If "insp and Oil" are shown in the display, get to insp by toggling the trip mtr button. follow above procedure, but don't yet turn off the ign, press the trip mtr button again and "oil" should appear, again turn the minutes knob to the right and "service----" will appear. Turn ign off and service is reset. Works for me on my 2000 T4.
Where is the reset switch located for the service AWD light on a 2000 Olds Bravada?
no reset switch in this system
How do you reset service light on 2000 Volvo V70XC?
You can try disconnecting the battery for about 10 minutes. You can also go to any Autozone if you have one locally and they will reset it for you for free. or, you can simply turn your key to the II position on the ignition and your indicator lights should be on. then while still in position II push your trip set button and hold till service light starts blinking,now you have reset your service light for another 7,500 miles.
How do you reset the 'service required' indicator on a 2000 Jeep Grand Cherokee Laredo after completing the service?
Usally U turn the key on without starting & pump the gas pedal 3 times with in 30 seconds. ??? I'm not sure about that answer. I usually press the button on the overhead computer where the service interval required shows zero, then hold the RESET button until it goes back to 3,000.
