hi put key in ignition but not turned on.keep footbreak depressed and keep trip meter pushed in.turn ignition to on but dont start car.wait and the millage will show ----.turn off ignition,next time you turn ignition on the service light will be out.
not sure if tigra same as corsa but worth a go! press and hold in button/switch under speedo turn ign on ,hold button"----" appears on read out,release button ,switch off,check it.
You don't!
There's no great ''trade secret'' as to how to reset the service indicator lamp on most Vauxhall's, simply refer to pages in the Owner's Handbook! For reference of those interested in such matters, but who might not have access to an owner's manual, this is the procedure to follow: Vauxhall service reset * Turn Ignition Off * Hold Trip Reset In * Turn Ignition On Still Holding * Trip Reset wait for three dashes * Turn off Ignition * Turn on Ignition to confirm To the best of my knowledge, the above service light reset procedure applicable to most Vauxhalls HOPE THIS SAVES YOU PAYING FOR INFORMATION!!!!!!!!!!!!!!!!!!!! ;-)
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
Just press the trip reset button
For the service light, Switch ignition on, The display will flash for 2 seconds, press the button next to fuel gauge until "----" appeares in the display, Release the button and switch the ignition off, and that should reset the light for you,
'Engine Airbag Code Reset Tool Vauxhall Meriva Zafira
needs to be done with a diagnostics machine.
how do you reset the service indicator on a 07 vauxhall combo van
1 Turn Ignition off 2 Hold trip reset In 3 Turn Ignition on still holding trip reset and wait for three dashes 4 Turn off Ignition 5 Turn on Ignition to confirm reset To the best of my knowledge the above service reset procedure is applicable to most Vauxhall.
04 combo 1.7d. Hold mileage reset button and turn ignition to second setting (dash lights on), keep mileage button pressed for about 5 seconds until --- goes away, the service millage should reset.
1. TURN IGNITION OFF 2. HOLD TRP COMPUTER RESET IN 3. TURN IGNITION ON 4. STILL HOLDING TRIP RESET, WAIT FOR THREE DASHES ON THE DISPLAY 5. TURN OFF IGNITION. 6. RELEASE TRIP RESET. 7. TURN ON IGNICION TO CONFIRM SERVICE LIGHT HAS GONE OUT.
Hiw do you reset a service light j2