timing belt light hilux 1kd
how to reset toyota kdn165 timing light
see hpoc.co.uk for a post on this very question
There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
To reset the fuel filter warning light off for the Toyota hilux one must replace the filter that switch the car on and off. They must also click the rest button.
how to reset the vigo timing belt warning light
how to reset oil timing on 1990 toyota
coaster bus how do you reset timing belt light 2010
on 2014 Toyota hiace
The timing belt warning light, on a Toyota Innova, can be reset by removing the timing belt warning light fuse. Leaves the fuse out for 10 seconds and put it back in.
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
The easiest way to reset the timing belt light, on your 1999 Toyota, is to remove the dashboard light. Keep the fuse out for 10 seconds and replace it to that slot.
The airbag light is on because the airbag module detects a problem with the system. Fix the problem and the light will go out by itself.
You can reset the timing belt warning light, on your Toyota Dyna 4093 5L motor, by removing the fuse. Keep the fuse out for about 10 seconds and then put it back in.
You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
You do not reset a timing belt you replace it.
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.
Please can somebody tell us what type of electrical systems the car has?Some of these models have manual speedos,others have digital ones.for the digitals,the procedure is outlined in older postings. But for manual speedo with computer systems(brain box),the procedure could involve a special tool likely to reset the light. A true case is the toyota hilux(japan)2002 LN 167 model,with 5L engine(has manual speedo)but has a diagnostic socket(DLC) You cant employ the push trick neither the digital reset options!
To rest a Toyota surf 1kz-te engine timing belt light, first determine which generation surf it is. If it is 2nd generation the reset is very simple. Using a slender item such as a pencil you can easily push the reset button on the clock.
how do i reset timing belt light on 1hz
If you have already replaced the belt and the light is still on you will need to remove the lower and upper dash panels and then remove the instrument cluster which holds your speedometer and other devices. The reset button for the timing belt light is behind the cluster.
Como puedo borrar manualmente la luz del t-belt de una hylux 2008.
The timing light reset if i remember is behind the speedo. Remove the speedo head and clocks and look on the back. There should be a little jumper in some terminals and next to it there should be some empty terminals. Just remove jumper from one and put into other, this should reset timing belt light.
It stays on until reset even if proper repairs completed. Some will reset if you disconnect batt for a while. if yours doesn't, any shop with a code reader can plug into your dash and reset for you.
most cars trucks or vans computers are simply reset be removing the power cable from your battery pressing on the brake for 10 sec to drain the rest of the power out of the viechiels computer then put on the power cable to the battery and start the viechiel and all should be good