1
Enter the VW Rabbit with the ignition key.
2
Close the door.
3
Hold down the odometer trip reset button. This button is on the right side of your instrument panel.
4
Insert the key into the ignition and turn it to the "ACC" position.
5
Wait for the wrench symbol to illuminate, then release the button.
6
Press the "MIN" button on the left side of the instrument panel.
7
Wait 10 seconds, then remove the key from the ignition and exit the VW.
how to reset change oil message on 2013 beetle
You do not have to reset the computer. It will take care of itself.
You do not have the reset the computer. It's memory is stored just like a home computer and is not lost when power is removed.
you can't reset it on your own. you have to go to a BMW dealer to reset the oli change in the computer.
You will have to locate the Info button to reset your computer on a 2009 Sprinter after an oil change.
Not hard.
according to autodata service lamp can only be reset using suitable diagnostic computer Dr.Pedro VolksWagen service technician
there is no need to reset the computer for an 02 sensor.
You need to access the info button on a 2009 sprinter van to reset the computer.
No reset is necessary.
No, all you need to reset is the clock and radio presets.
Not true. The computer does not have to be reset. You can change it yourself. You may have to enter the radio code if it is a theft deterrent radio but you have to do nothing to the computer.