0
How do you ruduce ohms on speakers on a 12 volt car stereo 25 watts system the speakers are 2 ohms and stereo is 4 ohms?
Wiki User
∙ 10y ago
That should work fine...matching is not critical. However if you want to be "pure", you could:
1...Insert a 2 ohm resistor in series, but that reduces damping and you may get coil resonances.
2...Install a 2 ohm to 4 ohm transformer. Hard to find and expensive.
3...Install two speakers in series, remembering to phase them correctly.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Will stereo speakers that handle 275 watts handle a home stereo system pushing 105 watts per channel?
yes it will, but if you try to turn it up to loudly you may cause damage to the voice coil of your speakers
Should the brand of speakers you buy match the brand of the stereo you will be using them with?
Well mostly it depends on the peak wattage of your stereo, if you have a higher wattage stereo I would go with speakers that could handle your stereos watts or they will distort.
What does 2.0 or 2.1 mean when looking at speakers and how does this compare to watts?
2.0 and 2.1 or even 5.1 regarding speakers means that there are 5 speakers to one output device such as the stereo. 2 speakers coming out of 1 stereo or 5 speakers coming out of one stereo. If you were to talk about 9.2 this would mean that there are 9 speakers but attached to 2 output devices such as a television as well as a stereo. Hope this has cleared up your problem.
How many watts do factory speakers have in a 2010 corolla?
Speakers are measured in Ohms not Watts. Watts is the amount of power you will be supplying to the speakers. In my 2009 Corolla the speakers can handle at least 400 Watts as this is what my OEM JBL system is pushing.
I have a Sony hi-fi 6 ohm 210 watt rms stereo and want to get a set of pro audio 8 ohm 600 watt speakers will they work with my system?
A: Speakers are 6 ohms to match the output impedance of your system. 8 ohms will work fine minus some efficiency. THE NORMAL listening for a normal room is about a 1w. buying 600 watts speakers wil not make your system automatically push 600 watts but it will work,
What wattage are the speakers for the 2006 Hyundai Tiburon GT?
The 2006 Hyundai Tiburon GS 2-door hatchback with the 2.0 liter 4-cylinder engine comes with 6 speakers with 80 watts of stereo output. It has an AM/FM stereo and a mast antenna.
If you buy a 180 watt sterio and want four speakers do you need to buy 45 watt speakers?
Yes. That would be the ideal wattage. When if comes to watts you don't want to wire speakers to a system that will push more wattage than they can handle. Think of watts as an amount of power. If you push more power through to the speakers than they can handle than you'll blow them. Example: [Stereo]-----60watts------>[Speaker with 45 watt capacity] = Not good. You can wire a speaker with a higher wattage capacity than what the stero will put out. Example: [Stereo]-----60watts------>[Speaker with 60 watt capacity] = Good. Example: [Stereo]-----60watts------>[Speaker with 75 watt capacity] = Good too.
How loud is 75 watt?
If were talking power amp. 75 watts would be just enough for a fair home stereo sound system and good for a normal car stereo. The high end sound system in cars are sometimes over 100 watts.
What does 20 watts RMS50 peak x 4 channels mean in a car stereo?
RMS is basically the amount of watts that the stereo can continuously dish out and the peak is like the most watts it can give out but only in bursts. And the the amount of channels is how many speakers it can give power too. So basically you can continuously give out 20 watts to each speaker if you have four hooked up to the thing.
What mini stereos give the best sound?
Denon D-M37 system will give the best audio performance and it is a very small stereo. It is 30 watts per channel and it has converted speakers to give an extended frequency response.
What kind of amplifier do you need for two 16cm Coaxial 2-way Speakers?
If you have a newer car factory stereo or a a deck you purchased it alone should have enough power to power those. Depending on how much watts the speakers are.
How to Build Your Own Stereo By Purchasing Stereo Separates?
If you’re interested in having a truly powerful and amazing stereo experience, the only way to go is by building your own system. While it may be easier and usually less expensive to purchase pre-fabricated stereo units, by purchasing stereo separates, you have complete control over the composition of your stereo system. This process doesn’t need to be confusing or intimidating – if you follow the steps laid out here, you should be able to put together your very own stereo system quickly and easily. • The first big decision to make is what stereo receiver to buy. The receiver is the heart of your stereo system. It has inputs, to which you’ll connect your CD player, television system, DVD player, MP3 player, computers – having a stereo receiver gives you the flexibility to connect any device with an audio output. You’ll want to consider how many and what type of inputs your receiver has, how many watts per channel it can handle, surround sound features, and so on. • Next, you’ll need to consider how many and what types of speakers to purchase. At a minimum, you’ll need a pair of speakers (your left and right front channel speakers). These form the core of your stereo system’s sound. The best part about purchasing stereo separates is that you can start with just a single pair and build your way up to a full surround sound system. • After selecting your main speakers, you’ll need to consider if you want rear speakers, a center channel speaker (used mostly for TV and movies), and a sub-woofer. All of these components together comprise what is referred to as 5.1 channel sound (5 speakers plus the sub- woofer). • Depending on the number of types of speakers you purchase, you’ll next arrange the speakers in your room of choice to create the best possible sound for the space. • Finally, you need to buy cables to connect your speakers and your audio devices to your stereo receiver. You’ll want to buy something that is of high quality and durable so that it lasts for the life of the stereo system. Creating a home theater experience by using stereo separates is easier than you might have imagined. If you follow the easy steps laid out here, you should be enjoying your favorite movies and CDs with incredible sound in no time!
