In general, you look for differences in physical properties, like magnetism, solubity, density etc. Iron is a good candidate for magnetic separation. Salt (NaCl) is soluble - it dissolves in water (and can later be recrystallized by heating.) Lead remains when the other marterials are carried off. /Brian W
Magnet to get iron filings
Put the rest in water
Put that through a strainer.
Salt will be in water
Lead and sand will be in the strainer
Figure out the rest yourself. I don't know!
The best way to separate a mixture of salt and iron filings without the use of a magnet is to add water. The salt will dissolve. Now the mixture is filtered leaving iron filings on the filter paper. The filtrate is now heated to evaporate water off leaving the solid salt.
You can use water to dissolve the salt and leave the insoluble iron behind.
Aluminum and iron can be differentiated because iron is magnetic and aluminum is not. To separate them, expose the filings to a magnetic source and the iron will separate.
Use a magnet to remove all the iron filings, then using a cloth bag, add water to the sand and salt. The salt will dissolve in the water, leaving the sand in the cloth bag.
Mix with water, the pass through a filter paper. The salt will be dissolved in the water so it will be removed with the water, leaving the iron filings and gold dust on the filter paper. Leave this to dry then separate off the iron filings using a magnet, leaving behind the gold.
Use a magnet to remove the iron filings. The add water to dissolve the salt, and the aluminum filings will settle to the bottom of the container. Pour that salt water into a pan, heat it and evaporate the water, leaving the salt in the pan.
Salt will not be attracted to a magnet. A magnet can be used to separate the two. Heterogeneous means it can be mixed but it is not chemically combined
Help me
you dont.
A magnet.
1. Salt will dissolve in carbon disulphide 2. Now we have a mixture of iron filings sugar and carbon disulphide(salt dissolved in it) 3. Separate iron filings by magnet. 4. Remove the sugar by Decantation process. 5. Separate carbon disulphide and salt by distilation.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
Hold a magnet over it and the iron will fly out of the salt and stick to it, and the salt will stay there.
Iron fillings can be separated: - with a magnet - after the dissolution of the mixture, by filtering
U can separate salt and iron filings from each other by using a bigger magnet . There are other ways too . You can also put both of the mixture in a cup of water and watch as the salt evaporate or disappear . But the iron filings will come to the top . Or spreading the mixture on a table and using a magnet to separate them .
Aluminum and iron can be differentiated because iron is magnetic and aluminum is not. To separate them, expose the filings to a magnetic source and the iron will separate.
Use a magnet to remove all the iron filings, then using a cloth bag, add water to the sand and salt. The salt will dissolve in the water, leaving the sand in the cloth bag.
Mix with water, the pass through a filter paper. The salt will be dissolved in the water so it will be removed with the water, leaving the iron filings and gold dust on the filter paper. Leave this to dry then separate off the iron filings using a magnet, leaving behind the gold.