Remove the iron filings with a magnet. That will leave the sugar and sand left. Then use a fine sieve to remove the sand. Or if those particles are too much the same size, then add water to the mixture and then use a filter. The sand will stay behind on the filter. You now have to remove the water. You can do that by letting it evaporate.
Use a magnet to pick up the iron. Then add water. The sugar will dissolve and run out as syrup, and the sand will remain. ----
Use a magnet to remove the iron, then pour what is left into water. The sugar should dissolve. pour the solution through a sieve to remove the sand and gravel. A fine sieve can be used to separate the gravel and sand.
To separate this mixture, you could first use a magnet to separate the iron filings. Then, you could add water to dissolve the sugar, leaving the sand and sawdust behind. The sawdust can be separated from the sand by filtration.
You can separate sand and iron marbles using a magnet. The iron marbles will be attracted to the magnet, allowing you to separate them from the sand.
Here's the full scientific report I had to do in year 7. Title: Magnetic Separation Aim: To separate iron filings from sand using a magnet. Equipment: Magnet, sand and iron filing mixture, plastic bowl Method: 1. Pour the mixture into the plastic bowl 2. Move the magnet slowly through the mixture Results: When the magnet was moved through the mixture, it picked up the iron filings but not the sand. Conclusion: In this experiment we demonstrated that a magnet can pick up iron filings in a sand and iron filing mixture through magnetism. The aim was achieved as we were able to separate the iron filings from the sand.
Magnets would remove the iron. sugar is water soluble now you have sulfur and sand mixed. Apply heat sulfur will burn before the sand.
You should use a magnet to separate iron from sand. Iron is magnetic, so it will be attracted to the magnet and easily separated from the sand. A strainer would not work in this case as it would not be able to separate the two based on their magnetic properties.
Yes, water can be used to separate sand and sugar. Sugar will dissolve in water, while sand will not. By adding water to the mixture, the sugar will dissolve and can be separated from the sand by filtration or evaporation.
Soluble in water, sand is not.
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
Use a magnet. The magnet will remove the iron filings form the sand.
Use a magnet to attract all the iron out of the sand