Want this question answered?
Here is a link to the manual.... "http://www.atomicclocksstore.com/skyscan-atomic-clock-model-87700-manual"
It uses diamond atom as probe to scan the surface contours of biological specimens.
Press the set button then within 10 seconds push the seek and scan buttons to change the time.
You can associate multiple credentials with a single scan
press set DST and Time Zone flash use <-> to turn DST off or on, use <+> to change time zone. Default time zone is Pacific, zones cycle eastward (Mountain, Central, Eastern . . . Pacific)
How do you set the time on a S10/Scan atomic clock model 86715
Problem:"OF.L" appears in the outdoor temperature section of the LCD.Solution:1) Wait until the current surrounding temperature cools down or increases. Current temperature is outside of the measuring range of the transmitter or has temporarity affected battery strength. The outdoor temperature will be displayed again once the current surrounding temperature is within the range of the transmitter.
Instruction manuel for setting atomic clock sio/scan model86722
I can't find my manual do you change the clock battery first or the transmitter? I think it's the clock but can't remember
Here is a link to the manual.... "http://www.atomicclocksstore.com/skyscan-atomic-clock-model-87700-manual"
When your atomic clock loses an hour especially during a time change there may be two different causes. First the batteries must be fresh. Next there may obstruction between you and the broadcast transmitter in Colorado Springs, Colorado. Put the clock in the window that faces Colorado for a day after changing the batteries.
It uses diamond atom as probe to scan the surface contours of biological specimens.
The clock on a 2004 Civic can be set using the preset buttons. Hold down the scan button on the radio and it will allow the clock to be adjusted.
Press and hold the set button until the clock appears, then adjust the time using the scan buttons.
On my 97 E250 I change the digital clock by pushing and holding the clock button in, then change the hour up or down with the search arrows on radio, and the minutes with the scan arrows .
Turn on the power knob for the radio/clock. Wait until the clock display shows up. Press "set", and use the "scan" and "seek" buttons to set the time. Hope this helps!
With the radio off, hit "set" then "seek" for hour and "scan" for minute