answersLogoWhite

0

lock the door using the key. If you turn to lock twice, to lock all doors, the alarm automatically sets. Turn key twice on unlock to turn alarm off. Unless, like mine, that doesn't work and only the rear hatchback unlock turns the alarm off.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Is it alarm remote or remote alarm?

An alarm remote is a remote control for an alarm system. A remote alarm is an alarm that rings somewhere far away from whatever set off the alarm.


Set Up a Home Alarm System?

A lot of companies now offer home alarm security systems, such as ADT. Even the cable provider Comcast now offers home security services. Home Depot is another choice where you can purchase home alarm security system services.


How to set Car alarm for 2000 Mitsubishi galant?

To set the car alarm for a 2000 Mitsubishi Galant, first ensure all doors are closed. Use the key fob to lock the doors, which typically activates the alarm system. If your vehicle has a manual alarm system, turn the key to the lock position in the driver's door, which should also engage the alarm. Wait for the indicator lights to flash, confirming that the alarm is set.


Will a dog set off a motion alert system?

if you have a motion alarm system, yes there is a very good chance that your dog will set off your alarm. I would stop it while letting your dog out to be on the safe side


Will turning off the power set off a burglar alarm?

In depends on how the alarm system was programmed, but most of the time no. A properly programmed alarm system will send signals to the central station if there has been a power loss.


How do you set the alarm on the Remington hand held personal alarm system?

To set the alarm on the Remington handheld personal alarm system, first, locate the power switch and turn the device on. Then, press the designated alarm button, usually marked clearly, to activate the alarm feature. Some models may require you to hold the button for a few seconds or set a specific mode, so refer to the user manual for specific instructions based on your model. Ensure the alarm is functioning by testing it before needing to rely on it in an emergency.


How do you set and test the off course alarm in port?

To set and test the off course alarm in port, first access the ship's navigation system and configure the desired deviation limit for the vessel's course. Next, ensure the system is in operational mode and that the alarm settings are correctly saved. To test the alarm, manually adjust the vessel's heading to exceed the set deviation limit and verify that the alarm activates as intended. Finally, reset the course and confirm that the alarm deactivates when within the acceptable range.


How do you Turn off Harley Davidson alarm system?

Well on my 2004 softail Pushing the remote button 1 time set the alarm and pushing the twice deactivates the alarm


How do you set the alarm on a 2001 Cadillac DTS?

To set the alarm on a 2001 Cadillac DTS, first ensure the vehicle is locked. Use the key fob to lock the doors, which will activate the alarm system. If your vehicle is equipped with a factory alarm, you can also manually set the alarm by pressing the lock button twice within a few seconds. The vehicle's horn may beep to confirm that the alarm is activated.


Is there settings that have to be set by dealership when changing the body control module on 1996 jeep grande Cherokee limited edition?

Yes, the bcm controls the theft alarm.


How do you reset the security system on a Cadillac?

If you have set the alarm system off, lock the driver door, and then unlock it with the key and that should reset the security system.


What electrical wiring options are available for a car alarm system?

There are several electrical wiring options available for a car alarm system. A person can have their car alarm wired so it will go off if anyone touches it. Also, a car can be wired to set an alarm off is anyone tries to open a door.