you need to read the handbook on your car. Try this: depress the set button and at the same time turn the tuning knob. Also press the scan knob and turn the tuning knob the opposite direction. I am going by memory but I remenber setting the clock had to do with the set/scan buttons. I hope this helps you.
From the handbook:
1. With the ignition key on and radio off, press SET. The SET indicator will appear on the digital screen for five seconds.
2. During these five seconds, the clock can be set.
Depress (down arrow)SEEK to set the hour.
Depress SEEK (up arrow) to set the minute.
Turn the ignition key to the on position. Turn the radio off and press the set button. Set the hour and minutes using the seek buttons.
how do you set the clock on a 2003 chevrolet trailblazer
Press the set button one time. Then to set the hour you press the seek back button to adjust. For the minutes side, you would press seek forward. Then when done press Set again.
see owner's manual
How do youchange the clock on a 2002 zx2 ford escort?
How do I set the time?
Hold down the "arrow up" button (beside the "audio" button) and it should beep, use the same button for hrs and the "arrow down" button for mins
To set the clock on a 2002 Chevy cavalier you must press and hold one of the arrow keys located near the clock. You will hear a "beep" this is letting you know that your car is ready to set the clock. Quickly after you hear this beep, press the arrow buttons up and down and that changes the time. Leave it alone after the time is set and it will set itself permently until you change it again!! Very easy!
1. With the ignition turned ON and the radio OFF, press SET. The SET indicator will appear on the digital screen for five seconds. 2. During these five seconds, Depress the DOWN SEEK to set the hour Depress the UP SEEK to set the minute
AnswerTurn the radio off first. Press the set button. Use the scan and seek buttons to set the hour and minute.
You can set the clock on the Chevrolet S 10 pickup truck radio by holding in the power button and advancing the clock with the tuning button. The tuning button will move the clock setting forward or backwards.
Turn on the power knob for the radio/clock. Wait until the clock display shows up. Press "set", and use the "scan" and "seek" buttons to set the time. Hope this helps!
The hour and minute button in mine are the tiny buttons under the volume knob. The one on the left is the hour and the one on the right is the minute. Just hold it down for a second and it will change.
Depending on the set up. The hour/ min buttons are located on the lower right corner buttons if it is a CD player. Hold the buttons down to set the time. If you Cavalier has a set button, hold it down and while the set light is on use the seek and scan buttons to set the clock. If your 2002 Chevy Cavalier does not have a "set button" like mine, then hold down the "up/down" arrows located in the right corner for a few seconds and the time will change. down/hours up/minutes.
With the radio off,press the set button and then press the volumn to go up or down.
Push the set button then use the seek and scan buttons on the radio
Open that little book that came with your car, called the owner's manual. There you will find this information.
Turn off the radio and press the clock button. Use the adj dial to adjust the hour, press the clock button again to adjust minutes.
Look in the owner's manual. You will be relieved to know it is very easy. Locate the Tune button and at the bottome of it there are 2 small buttons, one to the left and the right. When you depress them it will cahne the hour(left) and the right will change the minute. Cathleen
Radio off, push and hold the "Set button". The "Seek" button changes either hours or minutes. Experiment with other buttons to find out which ones do the rest of it for you.From the handbook:1. With the ignition key on and radio off, press SET. The SET indicator will appear on the digital screen for five seconds.2. During these five seconds, the clock can be set.Depress (down arrow)SEEK to set the hour.Depress SEEK (up arrow) to set the minute.
turn off the radio, and then push set, and then use the search/scan buttons to go up in your hours and minutes. :)
Press and hold the up & down buttons that change the bass, treble, balance, fade, etc.
SETTING THE CLOCK (CASSETTE PLAYER) Have the radio on , then TO SET HOUR: Push " SET " and within 5 seconds , PUSH SCAN . Hold it until clock gets to correct hour , then let go . TO SET MINUTES: Push " SET " and within 5 seconds , PUSH SEEK . Hold it in until clock gets to correct minute , then let go . SETTING THE CLOCK ( CD PLAYER ) Push " SET " and with in 5 seconds , PUSH SEEK . Hold it in until the clock gets to the correct hour , then let go . TO SET MINUTES: Push " SET " and within 5 seconds , PUSH SCAN . Hold it in until clock gets to the correct minute , then let go . YOUR CLOCK IS SET
If its like my '90, power off the radio so that the time displays. Then, hit Set. Then the Seek/Scan buttons will change the hours and minutes. When you are finished, hit Set again to get out of Clock Setting mode.