Want this question answered?
On the side of the carb.
Idle is computer controlled, there is no adjustment screw.
To set the idle, adjust the carburetor.
there is a little screw on the back of the carb. if you loosen it, it will idle slower, tighten it, it will idle faster.
Best place for these answers is xjbikes.com. Enjoy! missionaryjon
Find the carburetor and then adjust the idle screw however you like. You'll need a Philips screwdriver.
If your looking at the carbueretor from the left side of the warrior, there is a small idle screw on the bottom-left side of the carbueretor. Turn it clockwise looking up at the screw to turn the idle up, and vice versa.
you are screwed. light it on fire and crack a brewski
As you are sitting on the bike, there is an idle adjustment screw on the left hand side of the carb about 1/3 of the way up on the slide. Turning the screw counterclockwise will slow the idle speed down on your bike and turning it clockwise will increase your idle speed ...Good luck
under the seat where the throdle screws in the carb, there is an adjustment screw, turn right and it increases the idle. it worked for me. do it while running. It is a large flat head screw that is on the throttle body control mechanism. Not on the carburetor itself.
yes i does.if your raising your rpm be sure to make sure that your throttle bodies are in sync.
It's usually next to the throttle body