on the back there are to holes and they have a and m you pres a twice then pres m till the right time comes up then squeeze the sides then leave it.
Many years ago I read that analogue (with hands on dial) watches were set to 10:10 time as it looks like a smiling face !
A person cannot set the time on Casio Atomic Solar watch because it adjusts the time by itself. That is the feature of all atomic watches. They are radio-controlled therefore, no need to adjust. Besides, the watch is running on solar energy.
1. press mode untill you are at the "section" (AKA alarm,time,stopwatch....) that you would like to change or set. 2. hold down the "set" button until the minutes/hours/seconds start to flash. 3. press "mode" to change what flashes (AKA minuts, hours,seconds.) 4. once you have got what you want to change flashing, press the adj. (adjust) button to change the number. 5. set your time! (remember to make sure that the number is "am" or "pm" , if you dont know how to tell, there will be a little "a" or "p" next to the hour...) 6. to finish setting your time, press the "set" button, this will exit the setting mode! have fun with your watch!
pull the tab out and set it and push it back in.
To set the time, depress the MODE button until the TIME option appears. Then press the SET button, followed by MODE again. Then, press the START/STOP button to set the correct hour. Press MODE again and use START/STOP again to set the minutes.
If they are set to the same time then yes
how do i set my active intent watch ?? tw2461 sr626sw/cr2016
Radio controlled watches use radio waves that are set by synchronizing a time code that are transmitted by a radio transmitter. These radio controlled watches are used to set and display the time accurately.
well first you...........................................................
Pin-set or nail-set pocket watches. Keyless winding. These pocket watches had a small pin or knob next to the watch-stem that had to be depressed before turning the crown to set the time and releasing the pin when the correct time had been set. This style of watch is occasionally referred to as "nail set", as the set button must be pressed using a finger nail.
Railroad standard time. The origin of the time zones around the world.
Railroad standard time. The origin of the time zones around the world.
Many years ago I read that analogue (with hands on dial) watches were set to 10:10 time as it looks like a smiling face !
how do u set a chronograph watch?
HOW do you set a v1588g Charles Raymond
AnswerCheck out the Related Link below.
Set the on board computer to 'clock'. Turn the pin to the right of the odometer display clockwise to advance time, counter clockwise to set time back. There is a small rubber knob on the pin for grip.