To set the time, depress the MODE button until the TIME option appears. Then press the SET button, followed by MODE again. Then, press the START/STOP button to set the correct hour. Press MODE again and use START/STOP again to set the minutes.
Hold down the set button when it is in the normal mode (where it shows the time and date) (this button should be labeled, if not then try the upper left button). Then wait a little while until it comes up saying "TIME", at this point press the "next" button, which is normally what is labeled (not on the screen) as "Mode". You will then get to the screen with the time and date. Continue pressing the "next"/"mode" button until you get to the day, then set the day with the "start/spilt"/"+" and the "stop/reset"/"-" button. Once that is done press mode again and you get to the date which you set the same way as the day. When done press the "done"/"set" button. Sorry, these directions are kinda confusing, but its hard to explain these things.
On the timex E tide, the crown has two positions, when you pull it out. The first position is for setting the tide. Pull the crown out to the first position and you should hear a small beep and the tide/temp hand will move to the 12 and 6 o'clock position. The red end of the hand should be at he 12 o'clock position, by default; this is the indicating end of the hand (for temp and tide). Now, use the buttons above or below the crown button to move the red end of the hand left or right around the dial, to the current tide. Once you have that set, push in the crown and check the tide. Push the button below the crown (tide button) and the tide/temp hand should move round to the tide time, you just set (with the red end of the hand marking the tide time)
pull the tab out and set it and push it back in.
To set the time on a Casio wr50m watch, select normal time view from the mode button. Press the adjust button, and seconds begin to flash. Adjust the time with the start/stop button. Switch from seconds, minutes, and hours with the mode button. When the time displays correctly, press the bottom adjust button to set the time.
You can set the time on your Casio 2608 GW-300 wristwatch by locating the tab on the side of the watch. Poll the tab out and you will be able to rotate the time display to the correct time.
If it's new, set the date/time and then demo mode will cease. If it's older, replace the battery.
set time timex t123s
dont know
:D
It is automatically set when GPS signal is acquired.
One way to set the time on a Timex is to press the mode button on the watch until it displays the time. Press set button and than the start/split button to change the time. Press the stop/reset button to decrease and press the set button again to set the time. Please refer to the related link for more information.
To turn the alarm off once it has started ringing you can push the left button on the bottom of the watch. If you are trying to set the alarm so it does not ring at all, I cannot help - I need that infomration.
In order to reset the time on the Timex Ironman Watch, locate the mode button and press it until the time and date show. Then locate the set button, press and hold until the word time appears and then release the button. Now set the time and press the set button one more time. The time has been reset and complete.
how do you set the alarm on the Timex T434s nature sounds triple alarm clock radio
Timex Watch setting Make sure you are in the hour/minute/second mode. Press "set" -- the seconds will flash. Then press "mode" again and the right minute number will flash. Press "mode" again and the left minute number will flash. Press "mode" again and the hour will flash. Press "mode" again and the month will flash. Press "mode" again and the date will flash. Any time any groups of these numbers are flashing, you can change the numbers by pressing the "start/stop" button. When you get the numbers you want, press "set" to lock in those numbers. To change from 12 to 24 hour, get the hour numbers flashing and press "split/reset." Then press "set" to lock in either 12 or 24 hour time.
I have received no information.
Hold the time set button on the back until the time flashes, then use the buttons on the top with the double arrows pointing right and left to change time time (advance and reverse). Same thing works for setting the date.