1) Remove timing belt cover and Valve cover. Remove all spark plugs. 2) Turn crankcase (with socket and ratchet) until #1 piston is at Top
Dead Center (A Screwdriver in #1 Spark plug hole will show top) 3) Rotate overhead Cam until intake and exhaust valves are closed over # 1 cylinder. 4) align - intake valve begins to open when piston begins to travel downwards (Intake Stroke). IE: Intake - Compression - Power - Exhaust
timing marks dodge 2.2 engine how to set them
The timing on a 1989 Dodge truck should be set to 10* after unplugging the temperature sensor.
Use a timing light
where are the timing marks on a 94 2.5 dodge shadow es
You need a timing light
The timing marks on a '97 Dodge Stratus are located on the timing chain and the camshaft sprocket. They must be aligned to set the initial timing.
Timing is controlled by the PCM. There is no user adjustment.
It is set to 0 deg. with a scan tool. It can not be done with a timing light.
The timing on a 1997 Dodge Ram is not set with a timing light. The distributor rotor is lined up with the mark on the pick up plate when the engine is at tdc to set base timing. The timing is then fine tuned with a scan tool. The scan tool is used to set it exactly to 0 degrees.
get the pullys lined up at the timing marks
you turn the distributor and use a timing light
It is not timed with a timing light. It is set to 0 deg with a scan tool.