P!S! when checking the timing on a Kia Sportage you should know that the sheer pin on the crankshaft pulley tends to go allowing the pulley to move so it 'looks' like its in time meaning the marks all line up and you can't tell without pulling off the lower(crankshaft) pulley, it is always a good idea to locate #1 spark plug take it out and drop a longgg screwdriver as you manually turn the timing belt whilst looking for the marks as that cylinder should be up as far as it can go with all the marks lined up for it to be in time if it starts going back down or doesn't quite get as far up as it should go with the marks lined up.. then its not in time and should definatley take off the crankshaft pulley to take a look at that sheer pin and the damamge it did...
needing to know how to do the time belt for a two wheel drive kia sportage.
already answered. see: how do you set the timing on 1996 kia sportage ?
see 200 kia sportage timing , i also have diagrams .
You cant set the timing it is computer controlled .
You don't! The computer, crank and cam sensors control timing.
I dont no
timing is set by the timing marks on the crankshaft,camshaft and timing belt. Send me your e-mail and I'll send you the daigram.
how to set your gears for timing belt on 1999 kia sephia
No brake light.fuse blows
1998 and newer have no timing marks. Timing cannot be adjusted.
computer, after you have done the manual setting with camshafts and crankshaft.Usually does not need if you get crank and cams right.
How to set the timing mark on kia clarus
GO 2 www.kiatechinfo.com for a FREE web info site.
how to set timing on a 2006 kia 1.6
left one is exhaust and right one intake, set to the cam timing marks, do not forget the crankshaft timing marks too, there are 2 of them also.
combination of timing marks and take out spark plug on cyl #1 and put a rag in spark plug hole and when it pops out as you turn engine over by hand you will be on compression stroke ,then just align crankshaft timing marks.
set timing on 2000 Kia Sephia
Dont set.. Keep a watch with you.
como encontrar las marcas de un sephia 1999
no need to set the timing for it automatically set its valve.only the cdi needs timing for they controls the electricity to burn your fuel....
setting the timing is automatic on Kia sportages, when you replace the timing belt ,this is were the manual timing is set by lining up all of your timing marks.It is not like the old days where you move the distributor 2 or 3 degress one way or another to aline the timing. I have a computer that i plug in to monitor the timing signals coming from the camshaft sensors and crankshaft sensor to see if timing is right. The old timing light can be used to see if your close but adjustment for the average joe is out of the question.
how do you set or check the timing on a 99 ford expedition?
where are thev timing markson a 1999 xj8 jaguar
timing does not need to be set on the 1.3l engine in model year 1999 as it is a distributor less igniton system all timing is done by the ecm
That requires an engine scanner to set the timing.