Want this question answered?
Timing is off ...
No. It positions the flywheel in the proper place for the ignition timing.
dot to dot
There is no way to adjust the timing on a 17.5 Briggs engine. The magnet is on the side of the flywheel and there is only one way the flywheel can line up. All you can do is make wure that the coil is gapped correctly.
The timing is not adjustable. The only way the engine can be out of time is if the keyway between the crankshaft and the flywheel is sheared. If it is in place and in good shape the engine will be in time.
Timing on all Briggs & Stratton small engines is set at the factory and non-adjustable. It is determined by the placement of the armature (coil) and position of flywheel on crankshaft. Unless the crankshaft is bent or the flywheel key is sheared (both are possible after an impact or sudden stoppage), timing is perfect. Rough running is likely an intake or mechanical problem.
Yes, you just aline the divot on the Cam gear with the dash on the Crank gear. Very easy to do.
the timing is non adjustable, if the key looks offset it is bent and needs replacing
Timing on all Briggs & Stratton small engines is set at the factory and non-adjustable. It is determined by the placement of the armature (coil) and position of flywheel on crankshaft. Unless the crankshaft is bent or the flywheel key is sheared (both are possible after an impact or sudden stoppage), timing is perfect. Rough running is likely an intake or mechanical problem.
No alignment is necessary on governor gear, only the camshaft (timing) gear.
You can not set the timing. It is determined by the keyway between the flywheel and the crankshaft. It only goes in one place. You can adjust the coil, the valves and the carburetor.
Timing on all Briggs & Stratton small engines is set at the factory and non-adjustable. It is determined by the placement of the armature (coil) and position of flywheel on crankshaft. Unless the crankshaft is bent or the flywheel key is sheared (both are possible after an impact or sudden stoppage), timing is perfect. Rough running is likely an intake or mechanical problem.